AK Sponsor
Posted: 1/22/2006 9:53:50 PM EDT
|
Using a GT receiver to make an m92 sidefolder. Got the front trunnion and rear trunnion in OK with a rivet squeezer, or so I thought. I could see from the rear that the rear trunnion was canted/twisted up to the right. Stuck it nose down in the vise and twisted it w/ a big C clamp. Problem solved? Then I see that the front trunnion sticks out past the receiver about a 32nd or more on the right but almost flush on the left. Should I call it good or redo the rivets? hinking.gif |
|
the trunnions arnt square ive done half dozen or so and only 1 was right without alot of modding i know most major builders just slap them together and dont spend that kinda time making shure they fit and those rifles seem to work well so i guess what im saying is its up to you it will shoot fine but you will know its not correct |
Do you have a picture of one? I hate to think that my $500 M92 kit is somehow defective.
AK Sponsor