Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AK Sponsor
12/10/2007 7:37:58 AM EDT
Had some major problems with a Century AMD65 last weekend.  
Rifle - Purchased in Sept. of '06
        700 rounds - 0 problems/malfunctions
        Cleaned after each range trip.  
Ammo - Wolf 124gr FMJ (been working out of the same case of ammo since Oct.)
Magazines - 5 mags purchased with rifle, all have been flawless

Weapon had multiple malfunctions per magazine.  Had 11 stove pipes with double feed.  Had two occurances were empty case was lodged between/underneath the bolt and cross pin behind the magazine well.  Fired 150 rounds with 13 stoppages.  
Disassembled and cleaned after shooting, no visual damages.  Extractor appears normal, no chipping or exsessive wear.  Slowly cycling the weapon, the BCG does have some side to side slop, but not enough were to bolt face loses contact of the ejector.  

Any help is appreciated.  Thanks.

12/19/2007 9:38:08 AM EDT
[#1]

Quoted:
Had some major problems with a Century AMD65 last weekend.  
Rifle - Purchased in Sept. of '06
        700 rounds - 0 problems/malfunctions
        Cleaned after each range trip.  
Ammo - Wolf 124gr FMJ (been working out of the same case of ammo since Oct.)
Magazines - 5 mags purchased with rifle, all have been flawless

Weapon had multiple malfunctions per magazine.  Had 11 stove pipes with double feed.  Had two occurances were empty case was lodged between/underneath the bolt and cross pin behind the magazine well.  Fired 150 rounds with 13 stoppages.  
Disassembled and cleaned after shooting, no visual damages.  Extractor appears normal, no chipping or exsessive wear.  Slowly cycling the weapon, the BCG does have some side to side slop, but not enough were to bolt face loses contact of the ejector.  

Any help is appreciated.  Thanks.

Check for gunk buildup under the extractor. Also check to make sure the extractor spring is not broken or worn out.
AK Sponsor