AK Sponsor
Posted: 11/5/2010 3:32:03 PM EDT
|
I'm finally going to build an AK. I found a Russian AKM kit that I am very interested in. Unfortunatley it comes with a Romanian barrell that is brand new and is obviously not headspaced the the russian bolt. I don't know if this is a bad way to go or not. I've built a few AR's that have turned out well but the idea of trying to get an AK barrel lined up right and drilling the barrel pin hole kinda worries me a bit. If I had that done by a professional builder would it cost an arm and a leg? I would be using a Nodak reciever by the way. Any thought would be appreciated.
Thanks in advance. ERic |
The process should not cost too much, but be sure to find a decent gun smith before paying for it. I find many gun smiths don't have a clue about the AK system and many are starting to respond to the increased popularity by attending our build parties. Unlike your ARs, AKs require a certain number of US parts so be sure to familiarize yourself with the 922r requirements. Personally I would prefer building using all imported parts and replace only the receiver, fire control group, piston and either some furniture or muzzle brake. So having a Romanian barrel and Russian kit is quite nice. I hope this gives you at least an idea of what to expect. Of course the cost for our services here in this forum is a sexy picture of the build in question. Most of us like seeing things in parts while others like to see them all dolled up. So be sure to pay tribute to the kinky AK builders. 
|
AK Sponsor