[ARCHIVED THREAD] - Romy side-folder problem

Posted: 10/11/2006 11:54:02 PM EDT

I purchased a Romy wire folder from a seller on GunBroker. It came with no screws, and I'm having the hardest time finding the proper screws. It appears that they must be flat-headed to allow the recoil spring to seat completely and properly. Any ideas on where I can find originals, or what I would need to ask for in a hardware store? I've been everywhere and cannot find a good match.

Posted: 10/12/2006 2:33:37 AM EDT

[#1]

Ace Hardware or Home Depot/Take the stock with you to make sure they fit. You'll have to get a shorter one for the rear hole otherwise the arm will hit it when you operate the folder.

Posted: 10/12/2006 2:39:49 AM EDT

[#2]

What you want to get is Flat Head machine screws with the cut for an allen wrench.

The thread is METRIC , but I forget what pitch.

Posted: 10/12/2006 11:50:58 AM EDT

[#3]

They are 5mm screws. DPH Arms has the screws for sale. I believe they are $4 a set. Check them out. They are great to deal with!! If the do not have them...check with Cope's.

Posted: 10/12/2006 12:02:46 PM EDT

[#4]

5mm screws from Ace Hardware. Less than a $1.00.

Posted: 10/12/2006 12:19:58 PM EDT

[#5]

Quoted:
5mm screws from Ace Hardware. Less than a $1.00.

+1.
and if they're too long and get in the way of the folder, just use a dremel to shorten them as needed.

Posted: 10/14/2006 5:58:47 AM EDT

[#6]

The Romy side folder uses 2 different lengths of screws. I also sell that same stock and happen to have some spare screws if you need them. Give me your address and I'll send you a set if you can't find them locally.

Blackjack Buffers

Posted: 10/14/2006 11:42:03 PM EDT

[#7]

I noticed that it would be two different lengths when I tried cutting different screws down to fit. Thank you Blackjack!

[ARCHIVED THREAD] - Romy side-folder problem

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Romy side-folder problem

[ARCHIVED THREAD] - Romy side-folder problem