[ARCHIVED THREAD] - Trigger reset help please (with pics)

Posted: 3/3/2007 8:54:47 AM EDT

As you can see one side of the hammer spring will move over to the middle and bind up after a few shots. This causes me to have to manually reset the trigger. The spring doesn't want to stay in place. Any ideas on how to remedy this. I'm new to the AK world. Thanks in advance.
Heres the best I could do with my camera.

Posted: 3/3/2007 2:31:39 PM EDT

[#1]

If it were me? I would ditch that spring - they cost next to nothing.

Alternatively - remove the spring & give that leg a good bend to the RIGHT with some needle nose pliers.

Posted: 3/3/2007 2:42:36 PM EDT

[#2]

Quoted:
If it were me? I would ditch that spring - they cost next to nothing.

Alternatively - remove the spring & give that leg a good bend to the RIGHT with some needle nose pliers.

check- The needle nose pliers seems to have worked. It is now more like the other spring

[ARCHIVED THREAD] - Trigger reset help please (with pics)

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Trigger reset help please (with pics)

[ARCHIVED THREAD] - Trigger reset help please (with pics)