AK Sponsor
Posted: 2/20/2013 7:11:59 AM EDT
|
My barrel on my VEPR is not threaded and was wondering what is the exact thread that I need to install this PWS FSC47 compensator. Any help would be awesome, Thanks!
http://primaryweapons.com/store/pc/viewPrd.asp?idproduct=57&idcategory=6 |
|
Your OD is prob. about .610", that's what mine where. the FSC47 does use M14x1 LH threads, and yes, that is what the die would say. You need an OD between 0.551" to 0.571" to thread it M14x1 LH, so you would need to turn down the end of the barrel. www.dinzagarms.com has great service and has/makes turndown and treading tools, in addition the site has great info, I.E.: specifies what OD range certain thread sizes will work with. I have several of his tools and they have all worked flawlessly.
-JTR P.S. make sure you use a TAT! |
AK Sponsor