[ARCHIVED THREAD] - first build

Posted: 10/21/2006 6:07:22 PM EDT

ok so i have it all together and when u go to pull to bolt back it gets stuck is there a way to adjust it was a yugo underfold but i got a fixed stock recvier plz help

Posted: 10/22/2006 3:29:46 AM EDT

[#1]

Can you give a little more info?

When does it get stuck? You can't pull it back, or once you pull it back it won't move forward? Will it move forward but you just have to help it some, or what?

Posted: 10/22/2006 5:43:39 AM EDT

[#2]

Is the Bolt Carrier binding on the rails?
I have had this happen after installing the center support.
Also check your ejector to see if that's where it's binding.

Either way, a small hand file will fix the problem.

If you can, remove the FCG to eliminate the hammer spring pressure from the picture.
When you slide the Bolt Carrier back it should have some side to side movement.
Not much but some. Say +- 10-20 thousandths".
Same for your Bolt as it slides next to the ejector.

Posted: 10/22/2006 12:04:39 PM EDT

[#3]

tryed to fire but but the fireing pin did not hit the center of the caseing how can i adjust that

Posted: 10/22/2006 1:35:16 PM EDT

[#4]

What kind of reciever. Homemade from a flat or did you buy a reciever. Trunions in right?? Not really enough info. maybe some pictures.

Posted: 10/22/2006 2:06:01 PM EDT

[#5]

+1 , much more detail please

Posted: 10/22/2006 3:49:04 PM EDT

[#6]

Quoted:
tryed to fire but but the fireing pin did not hit the center of the caseing how can i adjust that

What?

Is the firing pin centered in the Bolt?

Posted: 10/22/2006 3:59:37 PM EDT

[#7]

its a bought reciver ill have pics 2marrow

Posted: 10/22/2006 4:13:30 PM EDT

[#8]

Fine
But you have not answered any of my questions.

Posted: 10/22/2006 4:16:26 PM EDT

[#9]

yes binding on rails also it is centered on the head as far as i can tell

[ARCHIVED THREAD] - first build

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - first build

[ARCHIVED THREAD] - first build