[ARCHIVED THREAD] - front sight problem

Posted: 4/22/2005 8:09:12 AM EDT

No wonder I couldn't find the target. It looks like the front sight on an NHM90 is rotated just a tad off plumb with the barrel/gas tube/rear sight,etc. I'm thinking the only way to remedy this is to punch out the pins, move the sight to expose the grooves, and extend the grooves on the appropriate side enough to allow the sight to be rotated back to plumb and pinned in the correct location. Does this sound like the right solution or is there a better (more simple I hope) one? Thanks for any help.

Posted: 4/22/2005 8:42:09 AM EDT

[#1]

a cheaper, easier faster and simplier solution would be to replace the rear sight with a RPK one.......plenty of windage. takes about 1 min. to replace.

Posted: 4/22/2005 8:46:56 AM EDT

[#2]

Or go with a Mojo aperature site.....

Brad

Posted: 4/22/2005 9:26:06 AM EDT

[#3]

Not a Romanian exclusive huh?

I like everything to be straight when I hold the gun straight, so go ahead and rotate it.

Posted: 4/22/2005 10:16:35 AM EDT

[#4]

Go Here: www.gunsnet.net/Linx310/fsbcantfix.htm

I just did a SAR-3 last week, it worked great ...

Posted: 4/22/2005 10:24:02 AM EDT

[#5]

Quoted:
Not a Romanian exclusive huh?

nope, my MAK 90 is about 5 degrees to the left

Posted: 4/22/2005 4:27:56 PM EDT

[#6]

Guess I'll rotate it. Looks simple enough. Thanks again to all for advice.

[ARCHIVED THREAD] - front sight problem

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - front sight problem

[ARCHIVED THREAD] - front sight problem