[ARCHIVED THREAD] - yugo underfolder

Posted: 5/8/2005 10:11:46 PM EDT

could someone tell me how to disassemble the underfolder. I am in the process of removing the receiver sections and I cant quite figure out how to get the stock off.

Posted: 5/9/2005 12:10:43 AM EDT

[#1]

http://pookieweb.dyndns.org:61129/AK/docs/templates.htm

About 2/3 of the way down the page are diagrams that show how it all works.

You'll need a small punch and a hammer to drive out the pins. It's easy once you get an idea of what each part does.

Posted: 5/9/2005 4:51:15 AM EDT

[#2]

I took my underfolder apart last night. It was pretty simple to do. I just drove the first pin out from inside of the receiver stub out though the hole in the stub where the pistol grip would have been. Then I pressed the folding stock button and inserted a spent 40 S&W case in the mechanism to hold it open while I drove the second pin out of the tensioning nut. Next, I loosened this nut and knocked out the two alignment pins. I milled off all of the rivet heads went I got the folding stock off.

Yours,
One Rusty Nut.

[ARCHIVED THREAD] - yugo underfolder

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - yugo underfolder

[ARCHIVED THREAD] - yugo underfolder