AR Sponsor
Posted: 8/25/2015 7:45:52 PM EDT
Trijicon MRO Review and comparison against the Aimpoint T2
The Trijicon MRO or miniature rifle optic is the latest offering into the world of micro red-dot optics. Aimpoint has long been king in this arena, but Trijicon’s MRO is a strong contender to take the throne. Known for the nearly indestructible ACOG line of magnified optics, Trijicon is no stranger to quality products. This time around they’ve decided to shake things up a bit and possibly take over as leader in bombproof micro red-dot optics. 
Enter the MRO. The MRO is a newly designed micro red-dot that boasts an impressive list of features. To start with the MRO measures up at 2.6” long, 1.7” wide, and 2.0” high as compared to AImpoint’s T2 which comes in at 2.7 in long, 1.6” wide, and 1.4” high. The MRO weighs in at 4.1 oz with the battery installed and no mount and the T2 tips the scales at 3.4 oz with no mount and no battery installed. 
I can see! The objective lens of the MRO is one area where things start to get exciting. Trijicon made a huge improvement here, 5mm to be exact. The MRO has an objective lens of 25mm while the T2 objective is only 20mm. When dealing with micro optics, that’s a big improvement, especially when considering both optics are roughly the same size. This increase in size helps to reduce any “tunneling” effect felt while looking through the optic. I can tell you first hand it feels as though peripheral vision has been increased exponentially. 
The glass itself on the MRO is superbly clear, as with all Trijicon optics, and was void of any noticeable tint or hue. Both optics have excellent glass, but I felt the image downrange to be sharper when looking through the MRO as compared to the T2. 
Turn it on! Trijicon was smart when they decided on placement of the on/off, brightness adjustment knob. Having it on top allows the shooter to increase or decrease the brightness or switch to NV modes with either hand. This was a welcome change from the T2. I shoot left handed and if I transition the rifle to my weak hand, it is difficult to increase/decrease brightness, while staying ready on the gun. Having the adjustment up top makes it far less cumbersome to make any changes. 
I also appreciate having a mid-position on/off setting on the MRO. To turn the optic on or off just turn the rotary knob half the amount of clicks from your last setting versus having to dial it all the way back down. Fast on/fast off, a welcome addition. Both optics had very tactile clicks while adjusting brightness. That being said I feel the MRO had more positive clicks and the T2 exhibited a small amount of mushiness noticed while indexing between adjustments. 
Adjustment for days. The windage and elevation adjusters on the MRO are flush to the optic itself eliminating any chance of inadvertent changes of your mechanical zero during rough handling. I cannot express enough how much I hate having to take caps off in order to adjust my zero. The MRO changed the game here, no more caps to take off before I can change my zero. In addition to that the T2 relies on a rubber O ring to prevent water from entering the adjustment towers. Rubber O rings degrade over time raising the possibility of water entering the optic. 
The flush, sealed turrets on the MRO are easily adjusted with a flat head screwdriver or coin. The T2 relies on a special 2 pronged adjustment tool or if you don’t have that in your range bag, you can use the windage cap as it has that 2 pronged tool built into it. Think about that for a second; if I want to adjust the elevation on my T2 and don’t have the Aimpoint tool, I have to now take off both caps in order to adjust just the elevation. By the way you’re still going to need either a flat head screw driver or coin to remove the slotted cap on the elevation adjustment cap just to get the 2 pronged tool in there. The MRO has a total adjustment range of 70 moa and the T2 has…..I’m not really sure. I couldn’t find that information in any of Aimpoint’s literature. Not on the website or in the instruction booklet. 
The dot. The dot itself on the MRO appeared to be just that; a sharp and crisp round dot. Even when I placed my Eotech 3X magnifier behind the MRO the dot didn’t morph into some other shape. This allows for precise hits on target, with or without a magnifier. The dot on the T2 appeared more oblong in my experience. The MRO has 8 total settings; 6 are daytime brightness settings and 2 are NV compatible (hi and low). The T2 has 12 total settings; 8 are daytime and 4 are NV compatible. I was amazed that even during the brightest daylight the dot on the MRO was still readily visible. I didn’t have to hunt for the dot against any backgrounds. The T2 performed equally as well. 
Battery life. Both optics use a 3V lithium CR2032 type battery. Until now the Aimpoint line-up has long been the king of battery life. The T2 is no different boasting a 5 year run time when the optic is set to position 8 of 12 and drops to 10 months when set to position 10 of 12. Trijicon has risen to the challenge, the MRO has a 5 year battery life when set to position 3 of 8. Mounts. Trijicon includes 3 mounts with each MRO. A low mount, a full co-witness mount and a lower 1/3 co-witness mount, albeit none of which are quick detach. The T2 comes with their proprietary LRP mount which is in fact quick detach. After market support is ramping up and company’s such as ADM, Larue, Midwest Industries, etc are all working on mounts for the MRO. While these are not currently available I expect them to be available for purchase within the next coming week/s. 
Build quality. The MRO is made from forged 7075 aircraft grade aluminum and is fully sealed against the elements. It is also waterproof to 30 meters or 100 feet. Aimpoint states the T2 is made of “extruded high strength aluminum” but gives no exact specs. The adjustment towers are protected via rubber O rings placed at the base of each tower and is waterproof to 25 meters or 80 feet. The MRO allows you another 20 feet to operate operationally whilst under water. 
Conclusion. I have been using various red-dot optics for a number of years. I have used them in multiple roles as well; some are used as a primary optic while others have been used offset to a primary magnified optic. I have had the PRO, T1, and now the T2. While all of the Aimpoint’s are quality optics I feel the Trijicon MRO is the evolution of what a micro red-dot should be. Bombproof, a larger objective lens and FOV, battery life rivaling that of Aimpoint, completely sealed and weather resistant and with better ergonomics. In my opinion….All hail the new King! 
Trijicon MRO MSRP $579.00 Aimpoint T2 MSRP $846.00 Psalms 18 28 You, LORD, keep my lamp burning; my God turns my darkness into light |
|
I found this the other day. Informative and interesting.
Travis Haley - TRIJICON MRO OPTIC REVEAL Travis Haley - TRIJICON MRO RANGE AFTER ACTION |
|
Does it have a forged housing? Judging by the nicks and imperfections, it doesn't have the smooth and uniform surface of the Aimpoint, I also see flashing in the middle (on top and bottom)
I'm all for forged, I don't care about looks, even if the MRO does look strange because we're not used to plumbing pipe appearance 
ETA it does have a forged body Trijicon literature |
|
Quoted:
Does it have a forged housing? Judging by the nicks and imperfections, it doesn't have the smooth and uniform surface of the Aimpoint, I also see flashing in the middle (on top and bottom) I'm all for forged, I don't care about looks, even if the MRO does look strange because we're not used to plumbing pipe appearance
ETA it does have a forged body Trijicon literature Yes just like the Trijicon ACOG, VCOG, Reflex, SRS and perhaps also the RMR. They are all cast 'forged' my bad. It may be less expensive, but they are all tough as nails. If it performs as it should then it's a winning package. |
|
Quoted:
Does it have a forged housing? Judging by the nicks and imperfections, it doesn't have the smooth and uniform surface of the Aimpoint, I also see flashing in the middle (on top and bottom) I'm all for forged, I don't care about looks, even if the MRO does look strange because we're not used to plumbing pipe appearance
ETA it does have a forged body Trijicon literature From the Trijicon website "Hard-anodized, forged 7075-T6 housing is fully sealed and waterproof, providing durability in demanding conditions" |
|
Quoted:
Yes just like the Trijicon ACOG, VCOG, Reflex, SRS and perhaps also the RMR. They are all cast. It may be less expensive, but they are all tough as nails. If it performs as it should then it's a winning package. Quoted:
Quoted:
Does it have a forged housing? Judging by the nicks and imperfections, it doesn't have the smooth and uniform surface of the Aimpoint, I also see flashing in the middle (on top and bottom) I'm all for forged, I don't care about looks, even if the MRO does look strange because we're not used to plumbing pipe appearance
ETA it does have a forged body Trijicon literature Yes just like the Trijicon ACOG, VCOG, Reflex, SRS and perhaps also the RMR. They are all cast. It may be less expensive, but they are all tough as nails. If it performs as it should then it's a winning package. Theyre forged, not cast |
|
Quoted:
Looks to be lower 1/3, but trijicon gives the option of absolute, lower 1/3, or really low Quoted:
Quoted:
I cant tell from the pics, is that the absolute or lower 1/3 mount? Looks to be lower 1/3, but trijicon gives the option of absolute, lower 1/3, or really low This pic makes it look like absolute, but the other full rifle shots make it look like lower 1/3 
|
|
Quoted:
It is kinda ugly but growing on me, I think I might have to get one. I have seen some pics with a different mount that looks an awful lot like a Larue mount.... Img sure he has one designed and ready to go. Scalarworks is designing one. I bet the other big players are going to be making mounts as well. |
|
Quoted:
Sorry for the delay, it's the full co-witness mount Quoted:
Sorry for the delay, it's the full co-witness mount This is exactly what I ordered. Less than $500 shipped to my door, I don't see how I could miss. For anyone wanting to wait on picking one up for fear of durability issues, I think you should put a little more faith in Trijicon and the hundreds of thousands of optics they have built thus far. Quoted:
It is kinda ugly but growing on me, I think I might have to get one. I have seen some pics with a different mount that looks an awful lot like a Larue mount.... The pics on the Trijicon website show the LaRue mount. I think this optic is going to be a big hit, I don't suspect many manufacture will want to miss out on selling aftermarket mounts for the RMO. If mounts aren't available at the same time as the optic, I'm sure they won't lag too far behind. The stock Trijicon mounts look nice for those not wanting QD, I like that they have done away with the ungainly and snag prone thumb knobs of previous mounts. |
|
Any aftermarket mounts currently available? The only one I could find was the DLOC. Is this the price point we should expect from the other manufacturers? Looks fugly and like it wouldn't take much to break it.
http://www.alamofourstar.com/index.php?page=shop.product_details&product_id=45&flypage=flypage-ask.tpl&pop=0&option=com_virtuemart&Itemid=2 |
|
Quoted:
Any aftermarket mounts currently available? The only one I could find was the DLOC. Is this the price point we should expect from the other manufacturers? Looks fugly and like it wouldn't take much to break it. http://www.alamofourstar.com/index.php?page=shop.product_details&product_id=45&flypage=flypage-ask.tpl&pop=0&option=com_virtuemart&Itemid=2 I have seen several pictures with what appears to be a Larue mount, I'm sure everyone is going to make a mount for this. |
|
Quoted:
I have seen several pictures with what appears to be a Larue mount, I'm sure everyone is going to make a mount for this. Quoted:
Quoted:
Any aftermarket mounts currently available? The only one I could find was the DLOC. Is this the price point we should expect from the other manufacturers? Looks fugly and like it wouldn't take much to break it. http://www.alamofourstar.com/index.php?page=shop.product_details&product_id=45&flypage=flypage-ask.tpl&pop=0&option=com_virtuemart&Itemid=2 I have seen several pictures with what appears to be a Larue mount, I'm sure everyone is going to make a mount for this. I emailed ADM and according to them, they will have mounts available September 1st. |
|
Quoted:
No not yet Quoted:
Quoted:
Are these in stock anywhere yet? No not yet Trijicon confirmed on their Facebook that the MRO will start shipping Sept 1st. I don't know if that means they will be shipping these to dealers on the 1st or if they will allow dealers to ship to customers on the 1st. Hoping it's the latter. Either way, I still need a mount from LaRue, ADM, or MI. |
|
Quoted: Trijicon confirmed on their Facebook that the MRO will start shipping Sept 1st. I don't know if that means they will be shipping these to dealers on the 1st or if they will allow dealers to ship to customers on the 1st. Hoping it's the latter. Either way, I still need a mount from LaRue, ADM, or MI. Quoted: Quoted: Quoted: Are these in stock anywhere yet? No not yet Trijicon confirmed on their Facebook that the MRO will start shipping Sept 1st. I don't know if that means they will be shipping these to dealers on the 1st or if they will allow dealers to ship to customers on the 1st. Hoping it's the latter. Either way, I still need a mount from LaRue, ADM, or MI. |
|
Quoted: On my phone so I don't have a link but look at their post where they asked if people had starting pre-ordering them yet. I said I had already ordered mine from SWFA, asked when they would ship, and asked if aftermarket companies had samples to start making mount concepts. This was their reply. http://i1101.photobucket.com/albums/g432/wsenefeld/Mobile%20Uploads/Screenshot_2015-08-31-03-19-01.png Quoted: Quoted: Quoted: Quoted: Quoted: Are these in stock anywhere yet? No not yet Trijicon confirmed on their Facebook that the MRO will start shipping Sept 1st. I don't know if that means they will be shipping these to dealers on the 1st or if they will allow dealers to ship to customers on the 1st. Hoping it's the latter. Either way, I still need a mount from LaRue, ADM, or MI. On my phone so I don't have a link but look at their post where they asked if people had starting pre-ordering them yet. I said I had already ordered mine from SWFA, asked when they would ship, and asked if aftermarket companies had samples to start making mount concepts. This was their reply. http://i1101.photobucket.com/albums/g432/wsenefeld/Mobile%20Uploads/Screenshot_2015-08-31-03-19-01.png I'm not getting too excited just yet because if Trijicon ships on the 1st, then it takes a while for the retail vendors to receive it and then it will take a while for them to ship it out. Like I said, I'm cutting it very close. |
|
Quoted:
It's odd how all the dot pics I've seen show a "tube" that doesn't seem flared. I'm sure it'll be noticeable in person, but pics and video don't seem to show it for some reason. http://www.recoilweb.com/wp-content/uploads/2015/08/Trijicon-MRO-Sage-Dynamics-Cowan-1.jpg This is a good shot 
|
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter