Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
7/23/2015 7:13:49 PM EDT
Hello everybody,



So I need some hive help with my 308 build




What I have:  Aero precision upper/lower combo

                    Aero precision lpk

                    Geissele trigger

                    Assorted furniture etc...




What I plan to get:  14.5 inch DPMS pattern Rainier Arms ultra match barrel in 14.5

                            Griffin Armament 30 cal flash comp

                            gas tube etc....

                            SLR adjustable titanium gas block

                            Rail:  undecided  either a centurion arms 14 inch cmr or an SLR 14 inch

                         




My problem:   Lots of folks have been talking about using an adjustable gas block with 308's since they are so easily over gassed.  This makes sense to me and I want to however I am having trouble with my rail choice/gas block combo....




I want to use the Centurion arms cmr 14 inch rail.  Their website lists the inner diameter as 1.25.  The SLR adjustable gas block I would like to use is listed as 1.365...So this is a no go.




Option A:  use SLR adjustable gas block and SLR rail and problem is solved




Option B:  use Centurion Arms rail and Centurion Arms gas block and pray that my gun is not over gassed.  




Has anybody here actually built a 308 with the centurion arms rail/gas block combo and have you had any issues?  Would you do it differently if you were doing it over again?




Thanks for the help

































7/23/2015 10:04:58 PM EDT
[#1]
I have never used the centurion stuff but i was just in your shoes a couple weeks ago and went with a SLR sentry 7 GB and a 15 inch Intrepid rail and so far i have no regrets and plan on using SLR for all my future builds. My opinion for you would be to go the SLR route with a Solo HG if you need the rail space you can get the rails for it based on whatever style of rail you choose keymod or mlok. Though i would add and i will try and get a picture for you in a bit but the slr rails look good on the Aero M5 sets
7/23/2015 10:27:15 PM EDT
[#2]


i dont have my barrel yet. BHW has like 10 weeks lead time right now.
7/24/2015 12:05:35 AM EDT
[#3]
The first and most important questions when approaching one of these is:

What barrel and bolt will I be using?

Is the chamber reamed correctly for a .308 gas gun?

Is the gas port diameter correct for the range of loads or specific load I plan to shoot?

Is my recoil system set up for that load range, and in the weather conditions I will be using it?

Furniture and all the less important things come after that.
7/26/2015 6:14:51 PM EDT
[#4]
Get an adjustable block. There should be one that will fit your rail. It makes tuning a breeze.
AR Sponsor