AR Sponsor
Posted: 11/8/2012 7:40:14 AM EDT
|
I bought a cheap AA flashlight ( fenix LD22 )
Fenix recommended using 1.2v NI-MH rechargeable batteries to get the most out of my light? Are they that much more powerfull than the AA 1.5v litium or alkaline what are the pros and cons? |
|
Quoted: I bought a cheap AA flashlight ( fenix LD22 ) Fenix recommended using 1.2v NI-MH rechargeable batteries to get the most out of my light? Are they that much more powerfull than the AA 1.5v litium or alkaline what are the pros and cons? The Alkaline's fall flat at higher power, but they can be had anywhere. Personally, I would not use them in any light that draws more than 500mA. The non rechargeable Lithium Iron are ~1.7v-1.72v out of the box and are great for the high drain uses and for stow it and forget applications. Very pricey, though. The Ni-MH batteries are good for EDC usage, especially with the Sanyo's (either their std Ni-MH or their Low Self Discharge Eneloops). Downside is the cost is higher upfront, as you need a charger, and you need to charge them every few months. |
|
Quoted:
Quoted:
I bought a cheap AA flashlight ( fenix LD22 ) Fenix recommended using 1.2v NI-MH rechargeable batteries to get the most out of my light? Are they that much more powerfull than the AA 1.5v litium or alkaline what are the pros and cons? The Alkaline's fall flat at higher power, but they can be had anywhere. Personally, I would not use them in any light that draws more than 500mA. The non rechargeable Lithium Iron are ~1.7v-1.72v out of the box and are great for the high drain uses and for stow it and forget applications. Very pricey, though. The Ni-MH batteries are good for EDC usage, especially with the Sanyo's (either their std Ni-MH or their Low Self Discharge Eneloops). Downside is the cost is higher upfront, as you need a charger, and you need to charge them every few months. Thanks for the help. BTW How do I find out if my light draws more than 500 mA
|
AR Sponsor