AR Sponsor
Posted: 8/2/2013 4:47:01 PM EDT
|
Looking at an operating system from PSA.
Anything about this configuration that would an experienced shooter would decide against? Need opinions please $1050 Description: Overview 16" barrel length 5.56 Nato Chamber 1 in 7" twist "Machine Gun Steel" barrel Extra thick Chrome lined barrel Forged upper and lower 12" Midwest Industries SSG2 Free Float Rail Aimpoint PRO Optic Magazine Lock Details Finally a complete rifle ready to go with a quality optic for one low price. Our PA-15 HF SS12G2 Carbine starts with one of our Premium chrome-lined Mil-spec steel barrels in the modified A2 profile, mated to our forged aluminum upper, and finished off with a Midwest Industries SS12G2 12" lightweight free float rail, low profile gas block and A2 Flash hider. The forged lower is built with our 6 position Mil-spec size buffer tube and stock, Standard PSA lower parts kit with A2 grip and aluminum trigger guard. It comes with one 30 Round D&H Magazine (where allowed by law) so all you have to provide is the ammo to start having fun. Barrel: 16" chrome lined Hammer forged proprietary chrome moly vanadium barrel, referred to as "machine gun steel" by virtue of its use in M240 and 249 weapons by the Military. In addition, the special chrome process allows for a chrome lining almost twice as thick as a standard M16. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a mid-length gas system. Modified A2 style profile is phosphate coated to mil-specs, and is High Pressure tested, and Magnetic Particle inspected, to ensure quality and dependability. Barrel is finished off with a Midwest industries SSG2 12" Lightweight free float rail, low profile gas block, and A2 flash hider. Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail. Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo. Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2. Mil-spec sized buffer tube is forged of 7075 aluminum, is dry film lube coated on the inside, has 6 adjustment positions, is finished with an M4 stock and has a staked castle nut. The standard PSA combat trigger has a smooth pull and clean break. |
|
PSA is solid and that's a solid choice. I picked up not one, but two M4-profile uppers off their site today during the sale. Unbelievable price of $399 for a complete upper. Oh, and BCG and CH were included. I can't build an upper for that price. Totally insane.
In short - Go for it. |
AR Sponsor