AR Sponsor
Posted: 4/11/2013 5:43:35 PM EDT
| So Im in the process of putting a Troy VTAC Alpha rail on my DDM4 and I have a question. Once I installed the barrel nut and got it pretty close to lining up I visually inspected it and it looks like the gas tube is running straight down the barrel, It looks even inside the upper receiver and I disassemble the BCG and it will slide in and out with ease. With all the tests ive done I should be good to go correct? Ive installed quite a few other rails but they all used their own barrel buts that didnt require lining up the teeth on a standard barrel nut so I want to make sure ive done this one correctly. |
|
Quoted:
Those are the tests that I run to make sure it is aligned correctly. I think you're good to go. Ok, Im fairly confident that its gonna be ok but I just wanted to make sure that there wasnt something else to check for before I get it back together and something goes wrong. |
AR Sponsor