AR Sponsor
Posted: 10/5/2003 5:57:19 PM EDT
| Title says it all. I'm new to the AR relm and I currently use NPro-7 spray cleaner and a Hoppes lube on my pistols. Thanks |
|
The Breakfree CLP works well for cleaning and leaves everthing lubed / protected, however, I tend to get mine very dirty (full auto), thus like the MPro-7 for cleaning in cold weather (no fumes) and a lower cost solvent based cleaner in warm weather (plus Simple Green in the ultrasonic for ONLY the bolt, as Simple Green is not good for aluminum ...). The cleaning is followed by flushing outside with a solvent (Brake Cleaning or Gun Scrubber) to flush out the dirt (in particular the chamber and action), then Breakfree CLP and 20mm auto cannon lub (dropped from Breakfree's product line) on the wear points. Also need either a nice one piece rod with a chamber / bore guide or one of the pull through systems from OTIS (no bore guide needed. I still use the USGI tool brush and the chamber brush (might be a little harsh but does clean well after shooting many hundreds of rounds in an afternoon). |
| Well looks like I need to do a quick search for the Otis products. I do like the Npro-7 also because I can clean in the house and not deal with any fumes at all. I'm sure I will be able to find a good mix of cleaing and cleaner products. Can you pick up the USGI issue cleaning kit/supplies at a Gov surplus stores as everybody seems to use something from the kits? Thanks Guys |
AR Sponsor