AR Sponsor
Posted: 10/6/2006 9:32:41 AM EDT
|
Can someone confirm how the charging handle is removed from a CZ V22? It looks like it should pull right out but mine doesn’t want to. I thought I saw a thread around here about a V22 manual but it must be older than 30 days. Has there been a manual posted? Thanks |
|
Do you mean the bolt handle? If so, there is a cross-pin that holds the end plate on the upper, I am pretty sure the ends of the pin are two different sizes, so push on the cap a bit (in towards the barrel) and push the pin out at the same time (towards the larger end of the cross-pin). Pull the pin and this releases the end cap, its under a little bit of spring pressure, remove the cap, and youll see the 'captive' rods which are attached to the end cap plus recoil springs (on the rods), when the rods are slid out of the bolt, the bolt handle is released and will now slide out to the right - it is held in by the captive rods. email me if this doesnt make any sense. Joe [email protected] |
Thanks Joe that's what I needed to know. Mike |
Here's the link to ADCO and the instruction manual: http://www.adcosales.com/instructions.html |
AR Sponsor