AR Sponsor
Posted: 8/11/2013 12:12:01 PM EDT
No matter which tool I use (I've used several) to mount a flashhider I tend to mess up the finish of the flats. I've marred to one degree or another an A1, A2, Vortex, AAC, Wilson, and Rainier. Yeah, I know; it’s a tool, shoot it. But I don’t want a $150 stainless Battlecomp with marred flats on my soon-to-be completed Blackout. So, what’s the trick? 
|
|
Quoted:
I believe that last part only works if you use the green electrical tape. You have been warned! Quoted:
Quoted:
Quoted:
Use the correct size wrench...if you only have one wrench, put tape on the jaws. this..... I believe that last part only works if you use the green electrical tape. You have been warned! Yellow electrical tape > Green electrical tape. |
|
Quoted:
Besides tape, inner tube or a bit of leather, you don't have to Gorilla tighten the thing. Some just can't help themselves and over-tighten shit all the time causing damage as they go. Exactly. If it's a pin job it's welded in place. It doesn't have to be cranked on. |
AR Sponsor