Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
3/15/2009 7:38:20 PM EDT
Are all Colt bolts marked MPC?  I got one supposedly a Colt, but not marked with MPC, please advise, thanks!
3/15/2009 8:07:18 PM EDT
[#1]
not always
3/15/2009 8:09:19 PM EDT
[#2]
According to my reference "Black Rifle II", all Colt bolts are marked with at least a "C" (or other letter  designators for other suppliers to Colt).  Not all bolts have the "MP" marking (however) according to the same reference, although it's stated that all Colt bolts were magged and proof tested.

This reference is dated by 5 years so a lot could have changed since then.
3/15/2009 11:06:42 PM EDT
[#3]
I have two Colt bolts one is marked with MPC one is just marked with C, I got both in 2005.

Both came with carriers marked C on the left side.
3/16/2009 6:08:01 AM EDT
[#4]
Colt uses a variety of markings on their bolts.































Some of the more recent bolts even have the "MPC" ground down and a large "C" engraved over it.


5/4/2009 11:27:16 AM EDT
[#5]
Quoted:
According to my reference "Black Rifle II", all Colt bolts are marked with at least a "C" (or other letter  designators for other suppliers to Colt).  Not all bolts have the "MP" marking (however) according to the same reference, although it's stated that all Colt bolts were magged and proof tested.

This reference is dated by 5 years so a lot could have changed since then.



I just broke down and bought "Black Rifle II".  The place this is mentioned in the book says that the "C" only marked bolts were originally intended for commercial use only.  I'd guess Colt was running low and grabbed the commercial line bolts to put in some LE rifles in the past few years.
5/4/2009 12:55:40 PM EDT
[#6]
The MPC on my 6920's bolt is stamped so incredibly faintly that I have to hold it in just the right light to even see it. But it's there.

You might try examining it in very bright light and maybe even using a magnifying glass if your eyes are like mine.

.
.
5/19/2009 2:05:09 PM EDT
[#7]
How about the bolt on the left? The bolt on the right I purchased from a reputable dealer several years ago as a "colt take-out bolt." The bolt on the left was advertised as a used colt bolt. Note the wider band below the stamp on the bolt on the left.  chalked the letters to improve clarity. The letters are all vibropeened.
5/19/2009 2:08:03 PM EDT
[#8]
Mine is marked MPX with a C on the other side.
10/7/2009 7:00:08 AM EDT
[#9]
I have a Colt bolt marked "CS".  Anyone seen this before?
12/2/2009 2:23:05 PM EDT
[#10]
I'm thinking it was made by Carrol Shelby................not sure though
12/2/2009 2:39:34 PM EDT
[#11]
Shelby made cars not carbines.
12/2/2009 3:45:00 PM EDT
[#12]
yeah, but his cars were real pistols
12/3/2009 3:14:36 PM EDT
[#13]

Great pictures of the Colt bolts. Do you have any comparison pictures of bolts vs rounds fired so that the general wear on a bolt could be used to determine approximate round count?

Thanks much
12/3/2009 3:35:11 PM EDT
[#14]
Same here all 3 of mine are marked MPC..
12/3/2009 3:45:06 PM EDT
[#15]

What is a "colt take-out bolt"?
12/3/2009 5:37:28 PM EDT
[#16]
Quoted:
How about the bolt on the left? The bolt on the right I purchased from a reputable dealer several years ago as a "colt take-out bolt." The bolt on the left was advertised as a used colt bolt. Note the wider band below the stamp on the bolt on the left.  chalked the letters to improve clarity. The letters are all vibropeened.
http://img.photobucket.com/albums/v335/howlie/bolt011.jpg


My take may be wrong.
I've seen hundreds if not 1,000's of Colt bolts.   I've never seen any marked it an off angle, like the ones shown.
Colt does has a certain pride in their product, and the reputation.  Like it or not most AR's are compared to Colt for quality.
458

1/6/2010 4:17:46 PM EDT
[#17]
My 6721 with a bbl date of 9/06 (bought it early in '07) has just a large die-stamped 'C' on the bolt, no hand engraving. Smaller 'C' on carrier.
AR Sponsor