[ARCHIVED THREAD] - Converting a fixed telestock

Posted: 12/28/2004 10:03:38 AM EDT

I did do a search, but it seemed like there was a thread about converting a fixed telestock to a collapsible. Does anyone have the link, or maybe could provide a brief procedure? Thanks!

Posted: 12/28/2004 11:28:24 AM EDT

[#1]

I'd probably just buy a new one. All of the fixed telestocks I've seen would probably be destoyed if they were to be fooled with.

Posted: 12/28/2004 1:11:10 PM EDT

[#2]

Problem is that some of the fixed units uses a A-2 length receiver extension.

Pull your buffer and see if it's a carbine buffer or the longer standard A-2 buffer.

If the fixed butt stock uses the Carbine buffer, then there may be hope.

Posted: 12/29/2004 1:59:31 AM EDT

[#3]

If you buy a new one I would recommend the RRA 6 position. It is nice. Ranks right up there with the bushmaster 6 position.

I used to have an old 4 position one. It was a pile. Very flimsy and had a lot of slack in it. Sold it to a friend of mine along with an AR to AK stock adapter. Now its on his wsar-10.

Posted: 12/29/2004 3:19:26 AM EDT

[#4]

Here is the topic. I converted two with good results. Careful set up on drilling is important.
RRA has the parts needed. Others may also.
www.ar15.com/forums/topic.html?b=3&f=4&t=201046

Posted: 12/29/2004 4:11:00 AM EDT

[#5]

adco offers a kit with all the parts needed to convert

[ARCHIVED THREAD] - Converting a fixed telestock

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Converting a fixed telestock

[ARCHIVED THREAD] - Converting a fixed telestock