[ARCHIVED THREAD] - DELETE

Posted: 1/4/2008 12:44:12 PM EDT

DELETE

Posted: 1/4/2008 12:48:28 PM EDT

[#1]

I drilled into it until I couldnt stop it from spinning, then punched it out afterwards.

Posted: 1/4/2008 12:51:06 PM EDT

[#2]

Posted: 1/4/2008 1:00:38 PM EDT

[#3]

Quoted:

Quoted:
I drilled into it until I couldnt stop it from spinning, then punched it out afterwards.

Was yours the standard sling mount that's attached to the bottom of the FSB?

Mine is the kind that is mounted sideways around the barrel under the FSB.

Front to back for the roll pins, top or bottom first shouldn't matter. You may have to remove them both before it will budge anyways.

Posted: 1/4/2008 1:02:01 PM EDT

[#4]

Quoted:
I drilled into it until I couldnt stop it from spinning, then punched it out afterwards.

For a standard rivet on the regular sling loop under the FSB, you should only have to use a punch from the left side towards the right. Same direction as if the brass ejects (unless you have one of those south paw guns!) I've removed a few of the regular loops, and never had to drill first.

Posted: 1/4/2008 1:12:40 PM EDT

[#5]

[ARCHIVED THREAD] - DELETE

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - DELETE

[ARCHIVED THREAD] - DELETE