AR Sponsor
Posted: 12/21/2009 2:02:16 PM EDT
|
Well, I bit the bullet, and since I run a suppressor, I decided this might be a good thing to get for my new build as it will help it run longer (hopefully) between cleanings. Between it and my noveske switchblock I should be good to go. I will get pics up soon, but first observations are that it did seem to have some imperfections in the finish, but all and all, its a tool and it will get worn, I could just see what looked like tool marks on part as well as what I can only describe as lines going along the sides.
I opted for the Auto BGC, but It came with an M16 hammer??, which I assume I can not use in a lower, and am going to try and trade for a semi auto hammer FAIL ZERO, or just give to my dad who has an registered m16, which I am going to give to him in the mean time. I will post pics and action report running a suppressor and see many rounds I can get before it fails... **update to original post...maybe failzero will trade out the hammer for one w/o the claw. |
|
Quoted:
Not much info on these. Their testing shows impressive results. If you can I'd like to see what you think after some shooting. I have one of the real early ones, and I continue to be impressed with it. No malfunctions ever, though I do run it with a small bit of lube. |
|
Quoted: My regular upper receiver and bolt never fails for about 1/3 the cost of that thing. I can buy a lot of CLP for the price differenceQuoted: I've come close to getting one of these just to try it out, but the receiver and bolt are kind of expensive Is it expensive if it never fails? |
You can buy a complete MPI auto BCG and have Robar plate it with NP3 for cheaper than that unit. the only thing im interested in is the hammer. Why?? Anyone installed the hammer and if so do you notice any difference. LWRCI sells ther complete nickel-boron coated trigger control group for $90, I have one and they are the smoothest trigger ive ever fired on any firearm( except a socom2 m14 from springfield armory) very nice for people building a custom lower or just want a KISS enhanced trigger. Anyway I am interested.
|
|
Quoted:
You can buy a complete MPI auto BCG and have Robar plate it with NP3 for cheaper than that unit. the only thing im interested in is the hammer. Why?? Anyone installed the hammer and if so do you notice any difference. LWRCI sells ther complete nickel-boron coated trigger control group for $90, I have one and they are the smoothest trigger ive ever fired on any firearm( except a socom2 m14 from springfield armory) very nice for people building a custom lower or just want a KISS enhanced trigger. Anyway I am interested. I believe the only reason for their coated hammer is because the bolt carrier slides against it. Probably not needed though. |
Sweeeet!!!! You can put me down for one. Will you be selling carriers and bolts seperately as well? Just ordered one of your chrome bolt assemblies, cant wait till it gets here.  Been very happy with all the epuipment Ive bought from Spikes.Im sure this wont be any different.
|
AR Sponsor