AR Sponsor
Posted: 12/13/2005 3:46:13 PM EDT
|
I noticed that on my 6920 with Mil-Spec Mags that when the bolt cycles back, the top round in the magazine cants outward and up away from the feed lips. Not so much that it is loose in the receiver, but it is not all the way under the feed lips. It is like when the carrier goes back and the spent casing is ejected, the top round in the mag is already half way out from under the feed lips and angled upward and to the right or left depending on which side of the mag it is from. It feeds like a champ...but is that normal? I never noticed it before...but then again, I never watched it cycle, I just shot it. |
AR Sponsor