AR Sponsor
Posted: 3/27/2017 5:34:08 PM EDT
|
Hello all,
I have gotten the "go-ahead" from my wife to start parting together an AR-15 build. This is my first AR-15 and I am willing to learn anything from anyone as I make this journey. I will be buying all of the parts separately, and may take me a few years to do so. Below are the parts I have researched and added to my list. If you have any suggestions please let me know what you think. I cannot promise that I listen, but like I said before I am willing to learn anything and everything about these rifles. The intent for the rifle is home defense, and secondary uses include hunting (I have never gone, but my wife and I are moving to Texas in the next few months and I think i might get into hunting more). The caliber I have chosen is 5.56 (open for suggestion). One area I would like your help in particular is to suggest a different barrel than the one below. I think I can save some more money for the same quality of barrel but I do not know if this is true. I would like to keep the barrel 16" long with a carbine length gas system. Any help is greatly appreciated and I am over joyed at the opportunity of building my first AR. |
|
List of parts:
Upper - Aero Precicion AR 15 M4E1 Enhanced Upper (Black) Lower - Aero Precision AR 15 Stripped Lower (Black) (I have already purchased this) Upper parts kit - Aero Precision Lower parts kit - Aero Precision Barrel - Daniel Defense 16" 5.56MM, Carbine, 1:7 Handguard - Aero Precision Quantum M-LOK Handguards, Gen2, FDE, 12", NO Bolt carrier group - FailZero AR15 Semi-Auto BCG Stock - Magpul MOE Carbine Stock MIL-SPEC MAG400 (FDE) Stock Buffer Kit - Aero Precision AR15/M4 Carbine Buffer Kit, No Stock Charging Handle - Radian Raptor Trigger - Geissele Super Dynamic Enhanced (SE-E) Trigger Non-rotational Pins - KNS Precision Non-rotational pins (Black/0.154) Grips - Magul MOE + Grip (FDE) Sling - Magpul MS4 Dual QD Sling Gen2 (Black) Front Sight - Magpul MBUS PRO Sight Rear Sight - Magpul MBUS PRO Rear Sight Gas Tube - Daniels Defense Carbine Length Ambi. Safety Selector - BCM Ambi. Safety Selector Semi B.A.D. Lever - Magpul Battery Assist Device Compensator - BCM Gun Fighter Compensator MOD 0 Fore Grip - Magpul M-LOK AFG (FDE) |
|
My 2cents:
I'd go with the Magpul CTR vr MOE. It's a few ounces hever but has a clamp to reduce the rattle/wiggle and a quick release option. If you thingk you might like a check weld stay away from Magpuls it's junk. Look at LaRue Tactical RISR you can use the charge handle with the stock fully collapsed. Best of luck, Kye |
|
Why not just buy an Armalite or Colt 6920 and be done with it and start shooting ?
Build you Areo precision as a second rifle or one for the wife. Don't get caught up in some of the hype that goes on with some brand names or devices. Any particular reason you specified carbine length gas system over mid ? |
|
Quoted:
Why not just buy an Armalite or Colt 6920 and be done with it and start shooting ? Build you Areo precision as a second rifle or one for the wife. Don't get caught up in some of the hype that goes on with some brand names or devices. Any particular reason you specified carbine length gas system over mid ? As per the gas system, I read a post on this forum saying to stick with carbine length gas systems when using 16" barrels. I could have read it wrong and I don't have the original link to the post. Why should I use a mid length gas system? |
|
Quoted:
a few years to build!?! check out palmetto state armory |
|
Quoted:
Drop the BAD lever and anti-rotation pins, add that stuff later if you need it. As said, go with the Magpul ctr. lastly, consider an 14.5 barrel with extended FH. |
|
Quoted:
My 2cents: I'd go with the Magpul CTR vr MOE. It's a few ounces hever but has a clamp to reduce the rattle/wiggle and a quick release option. If you thingk you might like a check weld stay away from Magpuls it's junk. Look at LaRue Tactical RISR you can use the charge handle with the stock fully collapsed. Best of luck, Kye |
I might not have a list of parts for your build but I wouldn't go high end just keep it simple to start so you can learn the ins and outs of the AR15 platform and most of all enjoy the build. Its a buyers market so you should easily be able to cobble together a quality build for $500. Hell I did my first build at the height of the 2008-2009 panic for around $500 (equipment exchange was good to me) so I know you will now. Enjoy! 
|
|
Quoted:
I might not have a list of parts for your build but I wouldn't go high end just keep it simple to start so you can learn the ins and outs of the AR15 platform and most of all enjoy the build. Its a buyers market so you should easily be able to cobble together a quality build for $500. Hell I did my first build at the height of the 2008-2009 panic for around $500 (equipment exchange was good to me) so I know you will now. Enjoy! |
AR Sponsor