AR Sponsor
Posted: 5/25/2014 9:51:21 PM EDT
|
I traded a Remington R1 for this and I immediately went to work. I wanted the rail to cover the entire barrel and muzzle device.
5.56 7.5 inch 1:9 Mega lower with an LMT ambi selector and Norgon catch Thordsen buffer cover and CAA cheek rest H2 buffer Rail is a 4/15 slimline and I took a $39.95 Pig knock off and turned the knurling off of it leaving about .250 inch exposed on the business end Arms and Midwest BUIS Now it has an Eotech 552 I cant decide if I will use a TRL1 or a Fenix T11 with a tape switch or thumb button (I have both) 
How I got it 
I still need to see how it really runs with abuse 
|
|
So just to confirm, you used a UTG PRO Slimline handgaurd and a knockoff PIG?
Any measurements on the inside diameter of the UTG Pro Super Slim by chance? Was looking at it to use w/ a Kak Industry Slim Flash Can and was not able to find the internal diameter of the UTG Pro Super Slim hand guards. |
|
Quoted:
So just to confirm, you used a UTG PRO Slimline handgaurd and a knockoff PIG? Any measurements on the inside diameter of the UTG Pro Super Slim by chance? Was looking at it to use w/ a Kak Industry Slim Flash Can and was not able to find the internal diameter of the UTG Pro Super Slim hand guards. For anyone curious, found the diameter of the UTG Pro Slim. 1.65" 
|
|
Quoted:
Im not sure about 1:9 in a 7.5 barrel since its not getting a full turn.... A 1:7 wouldn't get a full turn in a 7.5" barrel either ya know. Hell, can't think of any 6" or less handgun of any caliber that does. Hint: it's not really a significant factor. - OS |
AR Sponsor