AR Sponsor
Posted: 12/24/2006 7:54:15 AM EDT
|
Ok, I have a 16" 1/7 twist barrel. I have the LMT BUIS. I am trying to adjust my sights for the range this week to do the Improved BZO. I trun the allen wrench counter clockwise to loosen the nut and try to lower the knob 4 clicks beleow 6/3 (mine is 6 clicks between 4 and 6/3. I can't do it. No matter how many times i turn the wrench it won't go not even 1 click below 6/3. I must be doing something wrong. Please help. P.S. My knob says 5 4 Z then 6/3. Can someone tell me what the Z is? "Zero"? And if it is, which zero? Thanks Legion |
Make sure it's 3 full turns
With the allen wrench still in place, and while holding the top half of the elevation drum stationary, turn the bottom half of the elevation knob 4 clicks in the *UP* direction. This way, when you retighten the halves together, you're able to bring the bottom half back *DOWN* 4 clicks... but now the 6/3 part comes along for the ride. Bingo - you're at 6/3-4 Be sure the fourth click below 6/3 locks in firmly. Sometimes the sight bottoms out and it's close, but a little mushy feeling. In that case, you can repeat the procedure and add one more click below 6/3. |
AR Sponsor