[ARCHIVED THREAD] - Lakeside spring kit question

Posted: 7/1/2008 4:12:33 PM EDT

I recently purchased a Lakeside spring kit for a Ceiner/Atchisson .22 conversion kit.
The springs will not fit over the spring guide rod without twisting them in place, and then, the spring will not move over the guide rod. This seems to defeat the purpose
Is this normal?
Thank you.
Bob

Posted: 7/1/2008 5:46:12 PM EDT

[#1]

Something aint right... my lakeside kit springs fit just fine. Hold your stock spring up to the L.S. spring, the hole should be the same diameter.... if not, thats your problem and you should send them back. If thats not it your doing something wrong.

Posted: 7/2/2008 4:11:44 AM EDT

[#2]

Quoted:
I recently purchased a Lakeside spring kit for a Ceiner/Atchisson .22 conversion kit.
The springs will not fit over the spring guide rod without twisting them in place, and then, the spring will not move over the guide rod. This seems to defeat the purpose
Is this normal?
Thank you.
Bob

Pollish your spring guide rod then give it a try.
Some of the lakrside springs exspand when on the rod and squeezed down with the bolt on.

Posted: 7/2/2008 5:41:52 AM EDT

[#3]

Where's a good source for the Lakeside Spring kits?

Posted: 7/2/2008 6:54:11 AM EDT

[#4]

Quoted:
Where's a good source for the Lakeside Spring kits?

.
You can getm here
.
www.jbarms.citymax.com/catalog/item/3766994/3541941.htm

Posted: 7/3/2008 3:20:39 AM EDT

[#5]

Quoted:
Where's a good source for the Lakeside Spring kits?

We have some Instock.

Posted: 7/7/2008 11:11:28 AM EDT

[#6]

Anyone got instructions on "how to" for the Lakeside Spring kits?

Posted: 7/7/2008 5:42:57 PM EDT

[#7]

Quoted:
Anyone got instructions on "how to" for the Lakeside Spring kits?

.
This may give you some help.
.
home.netcom.com/~uzisubgun/id3.html

Posted: 7/8/2008 3:44:29 AM EDT

[#8]

Cool....thanks!

[ARCHIVED THREAD] - Lakeside spring kit question

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Lakeside spring kit question

[ARCHIVED THREAD] - Lakeside spring kit question