AR Sponsor
Posted: 7/10/2010 6:17:20 PM EDT
|
Hi all. I’ve been following the forums for quite sometime now, but rarely post. Not exactly new to rifles, or AR’s in particular, but I still appreciate the information and seeing everyone’s AR’s, so I thought I would share my current build with you.
Noveseke 16” RECON AAC Blackout DD 12” Lite Rail Vltor MUR-1A BCM auto BCG, Ion Bonded Noveske stripped lower G&R Tactical LPK Magpul trigger guard, CTR, & ASAP Houge grip Troy BUIS ( on order ) Temporary optic: 10x42 mil-dot, 30mm tube Changes contemplated: Change out CTR with LMT SOPMOD ( normally use SOPMOD, CTR was just to try something different) Change out Magpul ASAP with Noveske QD receiver plate Change Gear Sector HK loop for Gear Sector QD mount Took it to the range today for first chance to ring her out, she was short stroking so I removed the “blue” Tactical Springs buffer spring and H buffer and swapped in a standard carbine buffer and lighter spring, problem solved. She ran flawless. Sorry no photos of targets, but they were not particularly impressive anyway, ( shooters fault not the carbine ). 6 shot group ( I know I know, 6-shot?, I was working through the possible causes of the short stroking and did not keep count) was 1 and 1/16” at 100 yards ( just over 1 MOA ). Based on my experience I have every confidence this little barrel will easily do sub-moa when I do my part, ( I’ll try to provide proof next time  )
Apologies for the poor photo (Stickman is safe) http://i960.photobucket.com/albums/ae86/norsemen_photos/Hobby/Noveske3.jpg http://i960.photobucket.com/albums/ae86/norsemen_photos/Hobby/Noveske2.jpg |
|
Thank-you all.
The furniture is actually OD. Thanks for the buffer advice. When I swapped them out, I was in a hurry and just took a spring/buffer combo I knew should work, hoping that was the problem and not misalignment of the gas port and block. Next time I am at the range I will swap just the buffer back and see how it runs. I agree about the O-ring's, the new bolts are strong and don't seem really need them. I will hold on to it for possible future use in one of my guns. Oh, and the scope was "borrowed" from my FN, just to test the gun out until I save the $ for a dedicated optic. Thinking about the Nightforce NXS 2.5-10 x 32, anyone have a suggestion or opinion? |
|
Quoted:
Thinking about the Nightforce NXS 2.5-10 x 32, anyone have a suggestion or opinion? I'm pretty partial to NF... but for that rifle, I don't think I'd want that magnification. 1-4x24mm with either the NP-1 or Mildot reticle would be more ideal. Assuming the gun shoots, you should be able to use it out to 500yds pretty easily with that |
|
Quoted:
Quoted:
Thinking about the Nightforce NXS 2.5-10 x 32, anyone have a suggestion or opinion? I'm pretty partial to NF... but for that rifle, I don't think I'd want that magnification. 1-4x24mm with either the NP-1 or Mildot reticle would be more ideal. Assuming the gun shoots, you should be able to use it out to 500yds pretty easily with that Thanks, I'll look into it. |
AR Sponsor