AR Sponsor
Lets see your AR-10s (Page 4 of 60)
Badge Ord #306-21  I'll warn you, I like a really low scope. Most people who shoot my rifles have trouble with too tight of a check weld. This gives about an 1/8" clearance between the rail and the scope. |
Capital punishment isn't for making examples, it's for making bad people dead!
Tell me about your Super Sniper. I just got a 10x42. The elevation turret is extremely hard to turn. Is that something that will work out or do I need to send it back for repair/trade? I mean I have to grab it with a full hand and really grip hard to turn it. Certainly not condusive to adjustments while shooting. I have it on my .308 10FP and am considering one for both my 10A4 and 10T carbine. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Yes I have the same problem, very tight adjustments turrets, they did loosen up some. I was thinking about pulling off the turrets and putting a dap(sp?) of silicon grease on the O rings, that might help. I haven't worried to much about, since I was thinking about going to a variable power scope. I bought the Super Sniper on a gamble, wasn't sure I would like it or the rifle. I like the rifle a whole lot, I think I would like it a lot more with a variable power scope. The Super Sniper on the rifle is a 10X42 with side focus, for the money it is actually a very decent scope. It's not as nice as a Nightforce or Mk4, but really really good for the price. It tracks good and it returns to zero after making large changes in elevation. |
Capital punishment isn't for making examples, it's for making bad people dead!
|
-Armalite Factory AR-10: 20" lightweight barrel, Armalite's carbon fiber free float rail (all green furniture) -Smith Vortex flash hider -Trijicon TA11 w/ TA51 mount -Tango Down Battle Grip -Magpul Enhanced Trigger Guard -Harris bi-pods Enjoy:     The gun had some "teething problems" when I bought it new (would fail to feed, fail to extract, or fail to eject every other round)...Sent it back to Armalite and they reworked the gun and all the mags, now I can't get it to jam, even with mil-surp ammo. The paint job is a combo of Brownell's Aluma-Hyde II Coyote and OD using a sniper's viel for the pattern. |
Jeff Carpenter - Adjunct Instructor
Tactical Response Inc
www.TacticalResponse.com
Training At The Cutting Edge!
Office: (731) 676-2041
Email: [email protected]
Tactical Response Inc
www.TacticalResponse.com
Training At The Cutting Edge!
Office: (731) 676-2041
Email: [email protected]
Is that bolt rifle a Savage? |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Very Nice - What kind of accuracy are you getting? |
It's hard to get any guage accuracy with a 3.5x optic, thus I haven't measured groups....But with Port mil-surp ammo, I'm getting a group that I can just about cover with a quarter at 50 yards. With a higher powered optic / finer reticle I could get much better accuracy out of the gun. |
Jeff Carpenter - Adjunct Instructor
Tactical Response Inc
www.TacticalResponse.com
Training At The Cutting Edge!
Office: (731) 676-2041
Email: [email protected]
Tactical Response Inc
www.TacticalResponse.com
Training At The Cutting Edge!
Office: (731) 676-2041
Email: [email protected]
It certainly does. I would definately buy another DPMS. Excellent quality, no issues and you can phone these guys and get their expert help quickly when you want it. I have been shooting inexpensive SA .308 ammo, 23 bucks for 140 rnds and its been very acurate up to 800yrs which is the furhtest I have had a chance to shoot at. I have an ace stock on it now and a RRA two stage trigger. The scope came with the rifle, a Millette 4x16x56 gold series..awesome clarity. 
|
|
26" Krieger barrel match rifle. May not be pretty but it works. http://img.photobucket.com/albums/0603/wryfox/NRAMatchAR10-1.jpg |
...I will support and defend the constitution...
Joined:
Jul 2003
Posts:
1648
EE: 100% (2)
CA, USA
This is a factory assembled Eagle Arms rifle. I took it out to the range for the first time last week and man am I in love. I didn't shoot for any groups but with South African mil-surp I could make hits on aluminum cans at 105 yds every shot. I plan on adding a CMC single stage trigger, some better glass and mounts, and free float the barrel. She should do 1moa all day before I'm done with her. The deer will be in trouble this fall.
|
"Announcing your plans is a good way to hear God laugh."
"Happiness is a hot pile of links and brass." - Old_Painless
"Happiness is a hot pile of links and brass." - Old_Painless
My newest addition!!! Detailed description here: www.ar15.com/forums/topic.html?b=3&f=118&t=245076 |
new-arguy asks: You wanna shoot something?
new-argirl replies: I'll shoot ANYTHING.
new-argirl replies: I'll shoot ANYTHING.
very nice !!! |
Just put a Super Sniper on my AR10A4 with SS barrel:  Haven't had it at the range yet in this setup, but expectations are high. I shot ragged holes (several shots touching) with my bolt Savages with this scope. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
I have never actually gotten to shoot off that, but I use it for my laser boresighter on the fence across the road. It would make a good bench.  The various levels on the top match up great for using with a bipod and resting the grip on one of the higher levels. It also works great for my Savage bolt actions with Choate Ultimate Sniper stocks. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
AND DON'T YOU FORGET IT!!!!!
nice gun |
Sig-Line Closed For Scheduled Routine Maintenance
Thanks bjwar10. Full power ammo sounds like a hot .22LR. No boom, just the sonic crack of the bullet. With subsonic, it's hollywood quiet. No action noise, just a hiss and a thud as the bullet hits whatever you're shooting at 
|
TEAM 8
|
Just checked out my new issue of American Rifleman, with a test of the ArmaLite AR10 .300 RSAUM... WHO'S got one of THOSE? I was thinking of trading my 2003 SEBR for a Bushmaster .308, but NOW, I don't think so! Buying the UPPER for that rifle would be a great idea.
|
BusMaster007
" ...PSYCHOLOGICAL MANIPULATION OF THE POPULATION BY THE FEDERAL GOVERNMENT ..."
" ...PSYCHOLOGICAL MANIPULATION OF THE POPULATION BY THE FEDERAL GOVERNMENT ..."
Its better to burn out, cause rust never sleeps.
Joined:
Jan 2004
Posts:
1102
EE: 100% (40)
LA, USA
Its better to burn out, cause rust never sleeps.
Joined:
Jan 2004
Posts:
1109
EE: 100% (40)
LA, USA
Uncle??? Huh? uncle sam? (sorry I am slow!!) Its mine, the doctor is on a larue SPR mount with doctor/jpoint mount. |
The war in Iraq is rated PG13 for language and some violence.
Do you not know that I live by war, and that peace would be my undoing? -Sir John Hawkwood
Do you not know that I live by war, and that peace would be my undoing? -Sir John Hawkwood
Lets see your AR-10s (Page 4 of 60)
AR Sponsor