AR Sponsor
Lets see your AR-10s (Page 58 of 60)
|
Originally Posted By markfall: Only took 18 years but I finally joined the club PSA Sabre lower with regular psa10 upper. Didn't like the rail, so I rebarreled it with a Midwest industries rail. Be warned, they have someone standing on a breaker bar to tighten the barrel nut down with no antisieze. Thought I was going to break something to loosen it. https://www.ar15.com/media/mediaFiles/142593/IMG_6403_jpeg-3430868.JPG This is a four shot group with irons at 100 https://www.ar15.com/media/mediaFiles/142593/IMG_6425_jpeg-3431061.JPG this is a ten shot group at 100 with the 2.5x optic. I'd like to work up a load for this rifle and throw on at least a 12x optic and see what I can do with it. https://www.ar15.com/media/mediaFiles/142593/IMG_6426_jpeg-3431064.JPG The Palmetto State Tightening Department takes their mission very seriously. |
|
Originally Posted By Bearcat24: Nice AR. Is that a 18 inch barrel? You need a thermal if you’re going after hogs. I put together a hog AR10. 16 inch faxxon match barrel, Hogster vibe 35, and a Sandman -S can for it. Now to figure out where to go that won’t cost me a kidney. 168 A Max shoots real good for me. Yes, 18” I’ve heard a lot of good things about the Zulu 5x20 and the range will be close. So close, we might just use a green light instead. I’m going to look up that Hogster Vibe, though. Thanks. |
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
42967
EE: 100% (212)
TN, USA
Finally (almost) done. Aero lower with Geiselle SSA trigger. Odin Works 18" stainless match grade upper with rifle length gas and a VG6 Gamma brake. I'm still considering rattle canning the upper, but that's a later project. For now, it's a very nice shooter that's a pleasure to shoot.
|
Member
Joined:
Feb 2023
Posts:
307
EE: 100% (3)
GA, USA
|
Originally Posted By mobiushky: Finally (almost) done. Aero lower with Geiselle SSA trigger. Odin Works 18" stainless match grade upper with rifle length gas and a VG6 Gamma brake. I'm still considering rattle canning the upper, but that's a later project. For now, it's a very nice shooter that's a pleasure to shoot. https://i.postimg.cc/dQRtPY4w/20250205-085229.jpg  |
Collector, historian, and enthusiast of A.R.M.S. rails, mounts, and accessories.
|
Originally Posted By 50cal: 16". Love the way this one shoots. https://www.ar15.com/media/mediaFiles/89/20200510_094020-1418754.jpg 20". The Faxxon Gunner barrel shoots 172g M118 pulls incredibly good. https://www.ar15.com/media/mediaFiles/89/20190530_093558-1062303.jpg @50cal What handguard is that in the top picture? |
|
Originally Posted By Camaroman: What handguard is that in the top picture? @Camaroman Don't remember. Found it on a search for a DPMS high shelf handguard |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
|
Originally Posted By Atropian_Defector: https://www.ar15.com/media/mediaFiles/523616/IMG_7124_jpeg-3468421.JPG Sabre-10’s Very Nice!! Let us know how that shorty Sabre 10 shoots with the K can. |
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
34884
EE: 100% (1)
USA
|
Waiting on flashlight and can. 12.5 308. Oh, and a forward assist. Attached File |
|
CA legal rifles. https://imgur.com/a/lSwpAna https://imgur.com/a/pwSbfvr |
 Sabre-10 with a few mock up parts. That's a fake suppressor, Griffin MGL-110 should be here by monday. Sending the upper off to D Wilson to install Rainier M110 barrel and m110 HTX gas block. Swapping scopes shortly. I trimmed the KAC grip a little. Almost a shame to take the PSA barrel off, it's one of the more accurate I've ever shot, sub MOA @100 with 5 different ammo types, multiple consecutive groups. Tried to take the handguard off today, the 2 horizontal bolts were easy, but the two tiny set screws in the bottom of the rail are glued in place with red threadlocker and torqued with the wheel of pain |
|
Originally Posted By mattjargon: Waiting on flashlight and can. 12.5 308. Oh, and a forward assist. https://www.ar15.com/media/mediaFiles/227873/12_5_308_jpg-3494525.JPG Very nice! I thought pretty hard about getting one of those discontinued Centurion CMR’s. Can you put a pic rail section on the 6 o’clock for a bipod? I couldn’t tell from pics on the site. |
Originally Posted By Samuel L. Johnson:
He who makes a beast of himself, gives up the pain of being a man
He who makes a beast of himself, gives up the pain of being a man
|
Is that Centurion 7.62 billet recr set? @stickman |
|
New to me POF Rogue with Revolution 16" rifle gas di barrel and adjustable gas block. Will run with an Omega 300 can. Haven't gotten to the range yet to get accuracy results. I have been lurking on the SFAR thread for 2 years and finally decided to get a lightweight 308. Found this here on the forum with several upgrades on the already respected Rogue platform and decided to "cry once" and try the more premium option in the lightweight 308 space. I love the feel and handling of this one compared to an old Gen1 bushmaster LR308 which was large, heavy, and cumbersome. With Bushnell LRTS 3-12 in ADM recon mount, empty mag, and Magpul QD sling is 10.25 lb. 11.25lb with Silencer. Dang scope + mount (2lb) really adds weight to the lightweight gun. Sling is a full pound too, then add ammo! Adds up quick. 
|
|
Attached File Just swapped on a 20” PSA “M110 we have at home” barrel I was given. Now I have the best of both worlds |
|
My barrel & gas block just got back from ADCO and I think this it’s done. Hopefully I’ll be shooting it this weekend. 16” BA gov profile mid-gas cut down to 13.5” Attached File The suppressor is mounted with a Griffin EZ-Brake. I’m hoping it will help that little YHM out just a bit. Over all it’s just a tad longer than a 16” w/A2 birdcage. 11lbs 15.5oz as it sits (unloaded). Attached File |
Originally Posted By Samuel L. Johnson:
He who makes a beast of himself, gives up the pain of being a man
He who makes a beast of himself, gives up the pain of being a man
|
Originally Posted By Goody454: My barrel & gas block just got back from ADCO and I think this it’s done. Hopefully I’ll be shooting it this weekend. 16” BA gov profile mid-gas cut down to 13.5” https://www.ar15.com/media/mediaFiles/180867/IMG_6960_jpeg-3496137.JPG The suppressor is mounted with a Griffin EZ-Brake. I’m hoping it will help that little YHM out just a bit. Over all it’s just a tad longer than a 16” w/A2 birdcage. https://www.ar15.com/media/mediaFiles/180867/IMG_6962_jpeg-3496138.JPG Damn!! That looks really nice, I just had my 16 in barrel cut down to 14.5 and now I'm wishing I would have went shorter. I have a 13 in Centurion rail so I had to leave room to mount my Sandman S-Mil. Can't wait to see how that thing shoots. |
|
Originally Posted By Goody454: My barrel & gas block just got back from ADCO and I think this it’s done. Hopefully I’ll be shooting it this weekend. 16” BA gov profile mid-gas cut down to 13.5” https://www.ar15.com/media/mediaFiles/180867/IMG_6960_jpeg-3496137.JPG The suppressor is mounted with a Griffin EZ-Brake. I’m hoping it will help that little YHM out just a bit. Over all it’s just a tad longer than a 16” w/A2 birdcage. https://www.ar15.com/media/mediaFiles/180867/IMG_6962_jpeg-3496138.JPG That's hot. What mag is that? Love the ADM mount. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
Member
Joined:
Feb 2023
Posts:
340
EE: 100% (3)
GA, USA
|
Originally Posted By Goody454: My barrel & gas block just got back from ADCO and I think this it's done. Hopefully I'll be shooting it this weekend. 16" BA gov profile mid-gas cut down to 13.5" https://www.ar15.com/media/mediaFiles/180867/IMG_6960_jpeg-3496137.JPG The suppressor is mounted with a Griffin EZ-Brake. I'm hoping it will help that little YHM out just a bit. Over all it's just a tad longer than a 16" w/A2 birdcage. https://www.ar15.com/media/mediaFiles/180867/IMG_6962_jpeg-3496138.JPG |
Collector, historian, and enthusiast of A.R.M.S. rails, mounts, and accessories.
Other than a taper suppressor mount/brake, I'm calling this one finally done. Installed the SA adjustable gas block today since my direct thread mount arrived. It's a heavy bastard with the SPR barrel, but I'm looking forward to seeing how it runs with the can.
|
Joined:
Sep 2022
Posts:
86
EE: 0% (0)
GA, USA
|
Originally Posted By johnr283: Stag Arms left handed Other. Highland Green. https://thumbs4.imagebam.com/02/88/e0/MEZ6ZRM_t.jpg Added a new stock and grip, had the Cerakoted to match. 
|
|
I took my newly completed 13.5” 308 out yesterday and had some bizarre results. Sorry in advance for the novel… Attached File Here’s the parts list: Mid length Ballistic Advantage gov profile mid-gas 13.5” chopped down from 16”. Superlative gas block YHM Resonator K (Griffin EZ brake & Plan A) Toolcraft BCG (single ejector) M5 Upper and Lower Aero carbine buffer and spring Geissele SSA Leupold Mk-4HD 2-10 I started by shooting M80 ball to get the kinks worked out (gas block full open). To my surprise the gun cycled the first 5-rounds perfectly, 3 o’clock ejection w/bolt lock back on last round. …not what I was expecting. After owning two other AR10’s I expected serious tinkering to get it working. Next I loaded up a couple more to get a rough zero so I could start testing ammo. I aimed at a soup can on the berm at 50 yards that I planned on shooting a little later, and told my son to call the impact so I knew where to start adjusting the scope. I pulled the trigger and vaporized the can on the first shot… The next shot was in the center of the 12” steel gong at 100 yards. I guess my rough zero is done. Pretty strange for a brand new scope sitting on an unfired gun… A few clicks down to adjust for higher power 308 ammo and I started testing some factory loads. **I also adjusted the gas block to 15 clicks of bleed-off. This again yielded 3 o’clock ejection and lock back. Attached File 3-shot groups as that’s all I had left in a couple of the boxes. After each string I let the gun sit for 3-minutes to prevent anything from heating up too much. Attached File |
Originally Posted By Samuel L. Johnson:
He who makes a beast of himself, gives up the pain of being a man
He who makes a beast of himself, gives up the pain of being a man
|
I thought it was interesting that the barrel didn’t seem to gravitate towards a particular weight or bullet. The best groups were as follows (using my scientific tape-measure method): Federal Premium 165 SGK - 1.75” Attached File Hornady Precision Hunter 178 ELD-X - 1.6” Attached File Hornady America Whitetail 150 Interlock - 1.25” Attached File The other three were as follows: Federal 180 Powershock. 4.25” Hornady 165 CX. 3.75” Hornady 165 Interlock 3.5” To be honest I was rooting for the cheap Hornady American Whitetail ammo, as I don’t want to feed this gun anything expensive if I don’t have to. I may try some of my reloads as well, but am pretty happy with this for a deer/hog rifle. Living in Indiana my shots are rarely over 100 yards and my average shot is 63 yards. I would feel confident with this out to 300 if needed, although that would be very unlikely. All in all I was pretty surprised with the gun; from the reliability, gassing, and accuracy. If anything I was a little let down, as I expected to have to mess with the gun to make it work; which for me is half the fun… |
Originally Posted By Samuel L. Johnson:
He who makes a beast of himself, gives up the pain of being a man
He who makes a beast of himself, gives up the pain of being a man
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
34997
EE: 100% (1)
USA
|
16” carbine gas system, which is over gassed at the moment. Wish I would have gone with a midlength but didn’t know at the time. Thinking of going with heavier buffer to slow the BCG down so it cycles reliably. An adjustable gas block will work wonders. I had the same problem myself. |
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
43424
EE: 100% (212)
TN, USA
|
Originally Posted By Stickman: @NTXGlocker Yes, its the new ambi large frame receiver set. https://64.media.tumblr.com/ee9340448d42762d5a544715a934873c/1187a6eecc5649f2-94/s1280x1920/afccda9aa901822f80195ec0eff0257f514292dd.jpg Holy S that is hot. @synthwave @dirtdivision @amped --- @stickman what is that bandolier? |
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
|
Originally Posted By Stickman: @NTXGlocker Yes, its the new ambi large frame receiver set. https://64.media.tumblr.com/ee9340448d42762d5a544715a934873c/1187a6eecc5649f2-94/s1280x1920/afccda9aa901822f80195ec0eff0257f514292dd.jpg Nice. That set is on my radar. OOS now. |
|
Originally Posted By Stickman: @NTXGlocker Yes, its the new ambi large frame receiver set. https://64.media.tumblr.com/ee9340448d42762d5a544715a934873c/1187a6eecc5649f2-94/s1280x1920/afccda9aa901822f80195ec0eff0257f514292dd.jpg I have quite a bit of Centurion parts. And a reciever set that I really like. Had no idea they produced an AR10 sized receiver set. Guess I'll sign up for the "email when back in stock". |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
35086
EE: 100% (1)
USA
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
35099
EE: 100% (1)
USA
|
Originally Posted By withoutremorse42: https://i.imgur.com/OtJSO7Rl.jpg |
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
35100
EE: 100% (1)
USA
Friend to the best firearm mfgs in the world
Joined:
Mar 2002
Posts:
35101
EE: 100% (1)
USA
Lets see your AR-10s (Page 58 of 60)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter