AR Sponsor
Posted: 11/15/2008 1:15:28 PM EDT
|
Well, it times like this where every mag you can horde counts.
I have one mag since I bought it (it was also the first spare mag I bought) had double feeding issues. It is the only mag that does it. Well, after the first few times from the same mag I chucked it aside only to find it when cleaning today. I used a Cproducts kit: new spring, floor plate, follower. Same thing. Fail. |
|
Sounds like a feed lip is not stopping the next round to hit it. When it does that take the mag out and see which feedlip has around. It will be the other one that is letting the extra round pass. Then inspect it and see what you can do to correct it.
Any tools you use should have layers of tape on them. I use athletic tape, but electrical tape will do. |
|
Quoted:
Sounds like a feed lip is not stopping the next round to hit it. When it does that take the mag out and see which feedlip has around. It will be the other one that is letting the extra round pass. Then inspect it and see what you can do to correct it. Any tools you use should have layers of tape on them. I use athletic tape, but electrical tape will do. I am going to agree with this.... it sounds like a feed lip issue. Are they noticeably deformed or damaged? |
AR Sponsor