[ARCHIVED THREAD] - Magpul enhanced trigger guard

Posted: 12/11/2009 1:41:25 PM EDT

This thread shouldn't be long, just a quick question. I have already put a trigger guard on my CDD lower. I would like to change it to the magpul trigger guard. On one side of the guard, the pin does not go all the way through and stops on the inside of the lower. Is there an easy way to get this out? I thought I would ask before jumping right into it and screwing it up...Thanks

Posted: 12/11/2009 1:43:40 PM EDT

[#1]

You should be able to push it in with a punch. There's a spring behind it, I believe it's supposed to drop down for use with gloves.

Posted: 12/11/2009 1:47:43 PM EDT

[#2]

Ok, its all coming back now. So after I drop the side where the pin goes all the way through, drop it down and the other side is spring loaded. Is that correct?

Posted: 12/11/2009 1:50:24 PM EDT

[#3]

I believe so, the stock one has a spring loaded pin one side and the roll pin holding on the other. Just need to knock out that roll pin on the grip side and push the other one on the mag side in. Should be easy.

[ARCHIVED THREAD] - Magpul enhanced trigger guard

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Magpul enhanced trigger guard

[ARCHIVED THREAD] - Magpul enhanced trigger guard