User Panel
Originally Posted By krdt: Lol. Well, let's just say between my Brownells URG/ammo purchases and the Federal rebate ammo I got from PSA w/ 5% cash back, I'll be getting a pretty friendly payout in May :D. Kinda funny seeing DD show up a day late to the party; if they wanted to cash in selling RIS IIs individually, they should have done it back when they were commanding $500+ regularly. Of course, this was discussed back when they did the one-day sale thing. Either way, they are the ones who forced the whole "buy the URG for the rail" model on us. I say oblige them; it's the better deal anyway. If you want to get really shifty, time your purchase to coincide with a 10% coupon and AJ doing 6-8%. View Quote |
|
|
WTB:
- EOTech FDE XPS 3-0 - Tanodized Eotech G33 - Insight LA-5 |
View Quote |
|
---
NRA Life Member USN Retired |
I don't know if yall've seen this yet, but DS Arms is offering what appears to be a pretty legit Mk18 block 1 complete (no BCG/CH) upper. Here.
10.3" check. KAC RAS, check. MaTech BUIS, check. |
|
|
Originally Posted By Combat_Diver: Rattle can it, clone correct. I did use a FN Mk17 A2 grip. https://www.AR15.Com/media/mediaFiles/32677/IMG_6216_rx_jpg-908110.JPG CD View Quote |
|
|
Originally Posted By 78Staff:
I've been considering swapping my RIS II over the the URGI version... kinda on the fence. Is buying the stripped or near clone upper still the only way to get one or is there a source for the MK16 rail/barrel nut only? View Quote Might be able to get some table scraps from the EE. Your better off picking the stripped upper on a sale day and selling the barrel/gb and upper back to the EE. |
|
|
Originally Posted By AASG:
I don't know if yall've seen this yet, but DS Arms is offering what appears to be a pretty legit Mk18 block 1 complete upper. Here. 10.3" check. KAC RAS, check. MaTech BUIS, check. View Quote Specs: |
|
Code word is Yellow Umbrella.
"All welchers should be removed from the EE"-Aimless |
Originally Posted By Tigwelder1971:
Should be solid. Curious as to port sizing. Specs: https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20190411-195755-909499.png View Quote @mbf11 stated they make the port size .072 |
|
|
Originally Posted By wissota4:
I asked this around December, but it appears the thread is gone now. @mbf11 stated they make the port size .072 View Quote View All Quotes View All Quotes Originally Posted By wissota4:
Originally Posted By Tigwelder1971:
Should be solid. Curious as to port sizing. Specs: https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20190411-195755-909499.png @mbf11 stated they make the port size .072 |
|
Code word is Yellow Umbrella.
"All welchers should be removed from the EE"-Aimless |
Originally Posted By wissota4:
I asked this around December, but it appears the thread is gone now. @mbf11 stated they make the port size .072 View Quote Originally Posted By Tigwelder1971:
Thanks man. View Quote |
|
|
View Quote |
|
|
Originally Posted By Dyzastr:
That's a pretty sweet deal. Great price considering it comes with the correct handguard and rear sight. View Quote I’m getting tired of waiting for AU to get more... |
|
|
Originally Posted By AASG:
What does that drum fit that I see in the top left and what kind of weapon is that in the top right that I can see a vfg and bipod? View Quote Attached File CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14',17',18'&19' |
Originally Posted By Combat_Diver: Ultramax 100 Mk III https://www.AR15.Com/media/mediaFiles/32677/IMG_5868_jpg-909746.JPG CD View Quote |
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14',17',18'&19' |
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14',17',18'&19' |
View Quote |
|
|
Originally Posted By Combat_Diver:
Bob to the deep end, Mister! https://scontent-sea1-1.cdninstagram.com/vp/cc8c2d3a9fd8517b036b3b6818f109fa/5CD3C4B1/t51.2885-15/e35/43613380_835368703626628_8762909737943638906_n.jpg?_nc_ht=scontent-sea1-1.cdninstagram.com&ig_cache_key=MTg5NzYwMjY4MjU3MzMyMDgyNA%3D%3D.2 Now take your fins off! Now I never was a student at this facility. That land used to be a Hawk Missile site. CDQC used to be at the other end of Fleming Key. Class 6-85' CD View Quote Full respect to you and the others that have passed that kind of training. |
|
|
Originally Posted By wissota4:
I asked this around December, but it appears the thread is gone now. @mbf11 stated they make the port size .072 View Quote https://dsarms.com/p-17064-dsa-ar15-103-chrome-lined-m4-profile-17-twist-barrel-with-sight-tower.aspx |
|
|
View Quote |
|
|
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By thasiccness:
Here is my humble contribution. Tax stamp was submitted 25Mar and approved 7Apr https://i.ibb.co/zVfKwKm/65-BF183-F-A624-4498-9265-C8467-D61-EE16.jpg View Quote Your photoshop efforts notwithstanding. |
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
Originally Posted By thasiccness:
Here is my humble contribution. Tax stamp was submitted 25Mar and approved 7Apr https://i.ibb.co/zVfKwKm/65-BF183-F-A624-4498-9265-C8467-D61-EE16.jpg View Quote |
|
If U can't Truck It F!@k It!
|
Originally Posted By thasiccness:
Here is my humble contribution. Tax stamp was submitted 25Mar and approved 7Apr https://i.ibb.co/zVfKwKm/65-BF183-F-A624-4498-9265-C8467-D61-EE16.jpg View Quote ETA- I knew if I was patient I'd snag a beat up rear cqd on the cheap from the EE. gonna throw this one on my colt lower. Attached File |
|
|
Originally Posted By thasiccness:
Here is my humble contribution. Tax stamp was submitted 25Mar and approved 7Apr https://i.ibb.co/zVfKwKm/65-BF183-F-A624-4498-9265-C8467-D61-EE16.jpg View Quote |
|
|
|
Originally Posted By 2Keylows:
For some yes. Seems to be hit or miss though. In my case I'm at about 3 months and change. View Quote View All Quotes View All Quotes |
|
Practice, the master of all things. - Augustus
|
Originally Posted By krdt: Yeah, if you get an insta-proceed from NICS, it's about 14 days. If you're one of the lucky few that get stuck in background... you end up at 126 days and counting like me. View Quote 200.00, Finger Prints, Picture, Firearm Details (OAL, Manufacturer, Etc), engraving (barrel example)? Seems pretty straight forward, no? |
|
|
Originally Posted By Tacticool_Duck:
Sounds like I need to get on the ball then. I glanced over at the NFA forums, but what is the best way to go about doing it the first time Silencerco, do it yourself? 200.00, Finger Prints, Picture, Firearm Details (OAL, Manufacturer, Etc), engraving (barrel example)? Seems pretty straight forward, no? View Quote View All Quotes View All Quotes Originally Posted By Tacticool_Duck:
Originally Posted By krdt: Yeah, if you get an insta-proceed from NICS, it's about 14 days. If you're one of the lucky few that get stuck in background... you end up at 126 days and counting like me. 200.00, Finger Prints, Picture, Firearm Details (OAL, Manufacturer, Etc), engraving (barrel example)? Seems pretty straight forward, no? I'd suggest getting a pile of FD258s and an ink pad to roll your own prints - the cards can be had for free from the ATF and the pad from Amazon or Office Max. You can even go a step further and scan your prints for future use (what I do). At the most basic level, you'd just scan a completed FD258, then erase everything but the prints - maybe adjust levels/contrast a bit - and after a test print or two to adjust alignment, you should be good to go. That'll give you the ability to create fingerprint cards on demand just like Silencer Shop. The photo can be done with nothing more than a cellphone camera against a white wall (the white background isn't even required, but that's what I use). In fact, it doesn't technically even need to be in color. When it comes to the photo, they are pretty lenient (just needs to be passport style). For engraving, most do it in the trigger pocket and that's what I'd recommend. Doing the eFile itself is pretty self-explanatory, and there are fairly thorough guides that will walk you through it. |
|
Practice, the master of all things. - Augustus
|
Originally Posted By krdt: It's well worth doing yourself. Once you go through the process once, it's easy peasy; I can knock out a new form in about 10 minutes, counting fingerprint cards. I'd suggest getting a pile of FD258s and an ink pad to roll your own prints - the cards can be had for free from the ATF and the pad from Amazon or Office Max. You can even go a step further and scan your prints for future use (what I do). At the most basic level, you'd just scan a completed FD258, then erase everything but the prints - maybe adjust levels/contrast a bit - and after a test print or two to adjust alignment, you should be good to go. That'll give you the ability to create fingerprint cards on demand just like Silencer Shop. The photo can be done with nothing more than a cellphone camera against a white wall (the white background isn't even required, but that's what I use). In fact, it doesn't technically even need to be in color. When it comes to the photo, they are pretty lenient (just needs to be passport style). For engraving, most do it in the trigger pocket and that's what I'd recommend. Doing the eFile itself is pretty self-explanatory, and there are fairly thorough guides that will walk you through it. View Quote |
|
|
My cqd is bent also. Seems to be the norm now.
|
|
|
What are you gonna do brother? When 72oz of Cola runs wild on you!
|
|
Originally Posted By pbjunkiee:
https://www.AR15.Com/media/mediaFiles/348028/PSX_20190413_111938_jpg-911200.JPG View Quote ETA- just noticed the LT15-7”. Very cool setup. |
|
|
Originally Posted By krdt:
It's well worth doing yourself. Once you go through the process once, it's easy peasy; I can knock out a new form in about 10 minutes, counting fingerprint cards. I'd suggest getting a pile of FD258s and an ink pad to roll your own prints - the cards can be had for free from the ATF and the pad from Amazon or Office Max. You can even go a step further and scan your prints for future use (what I do). At the most basic level, you'd just scan a completed FD258, then erase everything but the prints - maybe adjust levels/contrast a bit - and after a test print or two to adjust alignment, you should be good to go. That'll give you the ability to create fingerprint cards on demand just like Silencer Shop. The photo can be done with nothing more than a cellphone camera against a white wall (the white background isn't even required, but that's what I use). In fact, it doesn't technically even need to be in color. When it comes to the photo, they are pretty lenient (just needs to be passport style). For engraving, most do it in the trigger pocket and that's what I'd recommend. Doing the eFile itself is pretty self-explanatory, and there are fairly thorough guides that will walk you through it. View Quote View All Quotes View All Quotes Originally Posted By krdt:
Originally Posted By Tacticool_Duck:
Originally Posted By krdt: Yeah, if you get an insta-proceed from NICS, it's about 14 days. If you're one of the lucky few that get stuck in background... you end up at 126 days and counting like me. 200.00, Finger Prints, Picture, Firearm Details (OAL, Manufacturer, Etc), engraving (barrel example)? Seems pretty straight forward, no? I'd suggest getting a pile of FD258s and an ink pad to roll your own prints - the cards can be had for free from the ATF and the pad from Amazon or Office Max. You can even go a step further and scan your prints for future use (what I do). At the most basic level, you'd just scan a completed FD258, then erase everything but the prints - maybe adjust levels/contrast a bit - and after a test print or two to adjust alignment, you should be good to go. That'll give you the ability to create fingerprint cards on demand just like Silencer Shop. The photo can be done with nothing more than a cellphone camera against a white wall (the white background isn't even required, but that's what I use). In fact, it doesn't technically even need to be in color. When it comes to the photo, they are pretty lenient (just needs to be passport style). For engraving, most do it in the trigger pocket and that's what I'd recommend. Doing the eFile itself is pretty self-explanatory, and there are fairly thorough guides that will walk you through it. |
|
|
|
When the question is buttstock, the answer is NEVER Poop Brown lol
|
|
---
NRA Life Member USN Retired |
|
Originally Posted By Dyzastr:
Have they updated the finger print cards lately? I still have to dig mine out, but I got a stack of em about 4-6 years ago when I did my first sbr, and wanted to be sure they were still acceptable an$ not outdated. View Quote View All Quotes View All Quotes Originally Posted By Dyzastr:
Originally Posted By krdt:
Originally Posted By Tacticool_Duck:
Originally Posted By krdt: Yeah, if you get an insta-proceed from NICS, it's about 14 days. If you're one of the lucky few that get stuck in background... you end up at 126 days and counting like me. 200.00, Finger Prints, Picture, Firearm Details (OAL, Manufacturer, Etc), engraving (barrel example)? Seems pretty straight forward, no? I'd suggest getting a pile of FD258s and an ink pad to roll your own prints - the cards can be had for free from the ATF and the pad from Amazon or Office Max. You can even go a step further and scan your prints for future use (what I do). At the most basic level, you'd just scan a completed FD258, then erase everything but the prints - maybe adjust levels/contrast a bit - and after a test print or two to adjust alignment, you should be good to go. That'll give you the ability to create fingerprint cards on demand just like Silencer Shop. The photo can be done with nothing more than a cellphone camera against a white wall (the white background isn't even required, but that's what I use). In fact, it doesn't technically even need to be in color. When it comes to the photo, they are pretty lenient (just needs to be passport style). For engraving, most do it in the trigger pocket and that's what I'd recommend. Doing the eFile itself is pretty self-explanatory, and there are fairly thorough guides that will walk you through it. ETA: Current ORI for the NFA Branch: WVATF0800 ATF-NATL TRA CTR MARTINSBURG, WV |
|
Practice, the master of all things. - Augustus
|
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it." |
What kind of gadget would one use if you wanted to accurately measure the diameter of the gas port?
I didn’t know about this thread last year when DD did their “initiative” and I bought my RIS II, and also the DD barrel and upper. I would have tried to measure it when I took the gas block off to install everything if I had known. Now it’s bugging me enough that I may take it all apart, but I want to have the proper tool first. Doesn’t help that DD never responded when I asked them about it. |
|
|
When freedom is outlawed, only outlaws are free.
USA
|
Originally Posted By Akin:
What kind of gadget would one use if you wanted to accurately measure the diameter of the gas port? I didn’t know about this thread last year when DD did their “initiative” and I bought my RIS II, and also the DD barrel and upper. I would have tried to measure it when I took the gas block off to install everything if I had known. Now it’s bugging me enough that I may take it all apart, but I want to have the proper tool first. Doesn’t help that DD never responded when I asked them about it. View Quote |
I survived the California MagRush 3/29/19 - 4/5/19
Will twerk the corner for PEQ |
|
Originally Posted By wissota4:
Although not as accurate, you could just get a caliper and measure the port. You will be able to tell if it's .07 or .08 whatever. View Quote View All Quotes View All Quotes Originally Posted By wissota4:
Originally Posted By MILSPEC556:
One would use a set of pin gauges for this measurement. I'm sure its .070 though Calipers will work as will drill bit shanks. #46=.081" #50=.070" |
|
Code word is Yellow Umbrella.
"All welchers should be removed from the EE"-Aimless |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.