User Panel
|
Maybe. Not up to date on all my lingo.
|
|
|
I just want to piss you all off and let you know my mk18 is on a PSA lower :)
|
|
|
|
|
Did the title change again?
|
|
|
Originally Posted By Mister_Donut:
So, something that's been bugging me for a while is the last decent photo I took of my Mk18 Mod 0 build. I installed the KAC handguard incorrectly, with the front tab sticking out of the handguard cap. Someone kindly pointed this out and though I corrected it, I never bothered to update the thread with any pics (proof that I understand instruction and I'm not completely devoid of intelligence, lol!). https://1.bp.blogspot.com/-W_eixK0g92s/WZpmYdTrafI/AAAAAAAApco/hhyeuiVr6xoUjjYUWdLDwnUm05mijOU9wCKgBGAs/s1600/P8201735.JPG Anyway, it was a sunny day and I figured I'd snap a few photos of the rifle. https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Apparently the Vero Beach marked covers are collectable? https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Markings on the RIS are in odd numbers, one of the indicators that it's a RIS, not the newer RAS? https://1.bp.blogspot.com/-OYRfd4Q9itk/WZpmYZ27_lI/AAAAAAAApco/5yC1Ro7euyUjGLyND_uGnhVlMzQ7cP7oQCKgBGAs/s1600/P8201739.JPG https://3.bp.blogspot.com/-W7hMYzKz2Ss/WZpmYbNkD1I/AAAAAAAApco/fwNw1mZE4TIwTfDnDsRIjt54hmE-7YFiQCKgBGAs/s1600/P8201740.JPG Until I receive my SR-15 stripped lower from One Shot Tactical, my Mk12 and Mk18 are sharing lowers. https://2.bp.blogspot.com/--A_XM0KyVG4/WZpmYXt-64I/AAAAAAAApco/RH9l3R4gIG0uWDX_evrgWudmvApqmlvKQCKgBGAs/s1600/P8201741.JPG I'm going to have to do something about the buttpad on the LMT SOPMOD. They list for about $15 from B5 Systems, but God knows how much these will cost in Canada, if I can get them all all. Then I have to figure out how to get the buttpad off, lol! https://1.bp.blogspot.com/-Wad7jHE7rxQ/WZpmYZYYLMI/AAAAAAAApco/qf5hY9Rpl9QRa3k_8UrxqkgO6SRfMbT-ACKgBGAs/s1600/P8201742.JPG https://3.bp.blogspot.com/-QKUH9JJBu3U/WZpmYS2zzrI/AAAAAAAApco/gfKAnEapm_wqxxOQ-9WEcKVVBNTxjJqqwCKgBGAs/s1600/P8201744.JPG With my fake can because Canada. https://1.bp.blogspot.com/-oqjNponc7zw/WZpmYaGQveI/AAAAAAAApco/a0DC263UaaMQ-4BxaZeJvOq7xsAwX_ffQCKgBGAs/s1600/P8201745.JPG https://4.bp.blogspot.com/-UhjKFbK7c1E/WZpmYQZ9tCI/AAAAAAAApco/G5rTKOQUN3wZfEWWDU1bKc1ot1UcBngfQCKgBGAs/s1600/P8201747.JPG https://2.bp.blogspot.com/-lcGZ2o7VHFk/WZpmYdWTQVI/AAAAAAAApco/r41Ct1gQ6hkijJMuVS2qqO-1t6cfbEghQCKgBGAs/s1600/P8201749.JPG https://1.bp.blogspot.com/-6otHHCCwb_U/WZpmRfxRa3I/AAAAAAAApck/T2GY_5MzjMwVCqcxsPDgptMqnX2NQ1IRQCKgBGAs/s1600/P8201758.JPG https://2.bp.blogspot.com/-nLOLY5Brvyc/WZpmRXH7NfI/AAAAAAAApck/p_HTNF63vvQ3UylWw1F5ZpSPOs40QAnrwCKgBGAs/s1600/P8201759.JPG That's it for now. I have however been entertaining the idea of doing up a Block II build for a while now. It's just such a costly build that I've never seriously looked into it. I think if I do go that route, I may have to compromise a lot more than with my Mk12 build, for instance, the PEQ15. For my personal requirements, it has no use whatsoever because first, I don't have NVGs, and second, even if I did, there's no place around here for me to run them (local ranges don't have night shoots, and as far as I know, there aren't any matches held at night). Though it does look cool having all that stuff bolted onto the front end of a very short rifle, I may look into getting an Airsoft clone just for pics (lol, like my fake suppresors). Anyway, I may or may not have taken the first step down a very dark path and I pray my wife never finds out, or that I come to my senses and start doing the math on how much this could possibly cost me (even without a real PEQ 15). https://1.bp.blogspot.com/-gG7uPXhQ6vs/WZOBiIyT5-I/AAAAAAAApUw/CToSHQg_QNcsOkTxrtECtOYdX8qgRJbJQCKgBGAs/s1600/P8141228.JPG View Quote |
|
|
Originally Posted By TNW:
Quick question - for you guys with the SF3P's, do they ring like the AAC 51T's? Trying to decide between that and the Closed Tine right now, and for you guys with the Closed Tines, how does the flash suppression compare to the 3P? Thanks View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By M4A1SOPMOD:
You have a RIS, the tab is suppose to be sticking out. View Quote View All Quotes View All Quotes Originally Posted By M4A1SOPMOD:
Originally Posted By Mister_Donut:
So, something that's been bugging me for a while is the last decent photo I took of my Mk18 Mod 0 build. I installed the KAC handguard incorrectly, with the front tab sticking out of the handguard cap. Someone kindly pointed this out and though I corrected it, I never bothered to update the thread with any pics (proof that I understand instruction and I'm not completely devoid of intelligence, lol!). https://1.bp.blogspot.com/-W_eixK0g92s/WZpmYdTrafI/AAAAAAAApco/hhyeuiVr6xoUjjYUWdLDwnUm05mijOU9wCKgBGAs/s1600/P8201735.JPG Anyway, it was a sunny day and I figured I'd snap a few photos of the rifle. https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Apparently the Vero Beach marked covers are collectable? https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Markings on the RIS are in odd numbers, one of the indicators that it's a RIS, not the newer RAS? https://1.bp.blogspot.com/-OYRfd4Q9itk/WZpmYZ27_lI/AAAAAAAApco/5yC1Ro7euyUjGLyND_uGnhVlMzQ7cP7oQCKgBGAs/s1600/P8201739.JPG https://3.bp.blogspot.com/-W7hMYzKz2Ss/WZpmYbNkD1I/AAAAAAAApco/fwNw1mZE4TIwTfDnDsRIjt54hmE-7YFiQCKgBGAs/s1600/P8201740.JPG Until I receive my SR-15 stripped lower from One Shot Tactical, my Mk12 and Mk18 are sharing lowers. https://2.bp.blogspot.com/--A_XM0KyVG4/WZpmYXt-64I/AAAAAAAApco/RH9l3R4gIG0uWDX_evrgWudmvApqmlvKQCKgBGAs/s1600/P8201741.JPG I'm going to have to do something about the buttpad on the LMT SOPMOD. They list for about $15 from B5 Systems, but God knows how much these will cost in Canada, if I can get them all all. Then I have to figure out how to get the buttpad off, lol! https://1.bp.blogspot.com/-Wad7jHE7rxQ/WZpmYZYYLMI/AAAAAAAApco/qf5hY9Rpl9QRa3k_8UrxqkgO6SRfMbT-ACKgBGAs/s1600/P8201742.JPG https://3.bp.blogspot.com/-QKUH9JJBu3U/WZpmYS2zzrI/AAAAAAAApco/gfKAnEapm_wqxxOQ-9WEcKVVBNTxjJqqwCKgBGAs/s1600/P8201744.JPG With my fake can because Canada. https://1.bp.blogspot.com/-oqjNponc7zw/WZpmYaGQveI/AAAAAAAApco/a0DC263UaaMQ-4BxaZeJvOq7xsAwX_ffQCKgBGAs/s1600/P8201745.JPG https://4.bp.blogspot.com/-UhjKFbK7c1E/WZpmYQZ9tCI/AAAAAAAApco/G5rTKOQUN3wZfEWWDU1bKc1ot1UcBngfQCKgBGAs/s1600/P8201747.JPG https://2.bp.blogspot.com/-lcGZ2o7VHFk/WZpmYdWTQVI/AAAAAAAApco/r41Ct1gQ6hkijJMuVS2qqO-1t6cfbEghQCKgBGAs/s1600/P8201749.JPG https://1.bp.blogspot.com/-6otHHCCwb_U/WZpmRfxRa3I/AAAAAAAApck/T2GY_5MzjMwVCqcxsPDgptMqnX2NQ1IRQCKgBGAs/s1600/P8201758.JPG https://2.bp.blogspot.com/-nLOLY5Brvyc/WZpmRXH7NfI/AAAAAAAApck/p_HTNF63vvQ3UylWw1F5ZpSPOs40QAnrwCKgBGAs/s1600/P8201759.JPG That's it for now. I have however been entertaining the idea of doing up a Block II build for a while now. It's just such a costly build that I've never seriously looked into it. I think if I do go that route, I may have to compromise a lot more than with my Mk12 build, for instance, the PEQ15. For my personal requirements, it has no use whatsoever because first, I don't have NVGs, and second, even if I did, there's no place around here for me to run them (local ranges don't have night shoots, and as far as I know, there aren't any matches held at night). Though it does look cool having all that stuff bolted onto the front end of a very short rifle, I may look into getting an Airsoft clone just for pics (lol, like my fake suppresors). Anyway, I may or may not have taken the first step down a very dark path and I pray my wife never finds out, or that I come to my senses and start doing the math on how much this could possibly cost me (even without a real PEQ 15). https://1.bp.blogspot.com/-gG7uPXhQ6vs/WZOBiIyT5-I/AAAAAAAApUw/CToSHQg_QNcsOkTxrtECtOYdX8qgRJbJQCKgBGAs/s1600/P8141228.JPG |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
|
|
Originally Posted By Roadblock:
Mk8 is somewhat right too. That is what you are seeing a lot of in the wild but G has that new SMR Mk16 that is not technically out yet. It's basically the same as the Mk14 (slim) but instead of having MLok at the 2, 6 and 9 positions, it's got it EVERYWHERE... 1:30, 3, 4:30, 6, 7:30, 9 and 10:30 positions. I spoke to someone I know at G after the pictures leaked from that Mil test one of the guys here in the thread was at and he did not deny its a thing and they have a contract for them. If I remember right its a 10 inch and 13.5 inch rails? Dude works there and said he can't even get one and no one probably will for a solid year or so which is disappointing because that was why I passed on the MK13 and 14, no MLok in the offset 1:30 position like the Mk8 has :( Side note, the ones being tested and I guess fielded when delivery happens will be black in color. https://farm5.staticflickr.com/4278/35629596022_3d0fde9918_c.jpg https://farm5.staticflickr.com/4286/35758401316_8fc20fc7fe_c.jpg View Quote View All Quotes View All Quotes Originally Posted By Roadblock:
Originally Posted By TNW:
Maybe. Not up to date on all my lingo. I spoke to someone I know at G after the pictures leaked from that Mil test one of the guys here in the thread was at and he did not deny its a thing and they have a contract for them. If I remember right its a 10 inch and 13.5 inch rails? Dude works there and said he can't even get one and no one probably will for a solid year or so which is disappointing because that was why I passed on the MK13 and 14, no MLok in the offset 1:30 position like the Mk8 has :( Side note, the ones being tested and I guess fielded when delivery happens will be black in color. https://farm5.staticflickr.com/4278/35629596022_3d0fde9918_c.jpg https://farm5.staticflickr.com/4286/35758401316_8fc20fc7fe_c.jpg The MK16 one with M-LOK on all sides other than the top is way better than the M14 but I think the old style set screw anti rotation tabs are better. Not sure why they wouldn't go with DDC. |
|
|
Originally Posted By Roadblock:
Mk8 is somewhat right too. That is what you are seeing a lot of in the wild but G has that new SMR Mk16 that is not technically out yet. It's basically the same as the Mk14 (slim) but instead of having MLok at the 2, 6 and 9 positions, it's got it EVERYWHERE... 1:30, 3, 4:30, 6, 7:30, 9 and 10:30 positions. I spoke to someone I know at G after the pictures leaked from that Mil test one of the guys here in the thread was at and he did not deny its a thing and they have a contract for them. If I remember right its a 10 inch and 13.5 inch rails? Dude works there and said he can't even get one and no one probably will for a solid year or so which is disappointing because that was why I passed on the MK13 and 14, no MLok in the offset 1:30 position like the Mk8 has :( Side note, the ones being tested and I guess fielded when delivery happens will be black in color. https://farm5.staticflickr.com/4278/35629596022_3d0fde9918_c.jpg https://farm5.staticflickr.com/4286/35758401316_8fc20fc7fe_c.jpg View Quote Maybe they'll go with black for consistency, concern over variation with DDC? Seems like Geissele DDC has much more variation than DD FDE. Anyone want to trade an EXPS3-0 for a COMPM4 plus cash or M620U? |
|
|
Originally Posted By BOONEA:
RC1 is still in jail, so this will have to do for the time being. https://scontent-ort2-2.xx.fbcdn.net/v/t1.0-9/20264705_10155420505067626_6347039086971172852_n.jpg?oh=569cab3cf1ba861fb697ccc216878ac4&oe=5A5B78A4 View Quote |
|
|
|
Originally Posted By SecretSquirell:
Originally Posted By M4A1SOPMOD:
Originally Posted By Mister_Donut:
So, something that's been bugging me for a while is the last decent photo I took of my Mk18 Mod 0 build. I installed the KAC handguard incorrectly, with the front tab sticking out of the handguard cap. Someone kindly pointed this out and though I corrected it, I never bothered to update the thread with any pics (proof that I understand instruction and I'm not completely devoid of intelligence, lol!). https://1.bp.blogspot.com/-W_eixK0g92s/WZpmYdTrafI/AAAAAAAApco/hhyeuiVr6xoUjjYUWdLDwnUm05mijOU9wCKgBGAs/s1600/P8201735.JPG Anyway, it was a sunny day and I figured I'd snap a few photos of the rifle. https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Apparently the Vero Beach marked covers are collectable? https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Markings on the RIS are in odd numbers, one of the indicators that it's a RIS, not the newer RAS? https://1.bp.blogspot.com/-OYRfd4Q9itk/WZpmYZ27_lI/AAAAAAAApco/5yC1Ro7euyUjGLyND_uGnhVlMzQ7cP7oQCKgBGAs/s1600/P8201739.JPG https://3.bp.blogspot.com/-W7hMYzKz2Ss/WZpmYbNkD1I/AAAAAAAApco/fwNw1mZE4TIwTfDnDsRIjt54hmE-7YFiQCKgBGAs/s1600/P8201740.JPG Until I receive my SR-15 stripped lower from One Shot Tactical, my Mk12 and Mk18 are sharing lowers. https://2.bp.blogspot.com/--A_XM0KyVG4/WZpmYXt-64I/AAAAAAAApco/RH9l3R4gIG0uWDX_evrgWudmvApqmlvKQCKgBGAs/s1600/P8201741.JPG I'm going to have to do something about the buttpad on the LMT SOPMOD. They list for about $15 from B5 Systems, but God knows how much these will cost in Canada, if I can get them all all. Then I have to figure out how to get the buttpad off, lol! https://1.bp.blogspot.com/-Wad7jHE7rxQ/WZpmYZYYLMI/AAAAAAAApco/qf5hY9Rpl9QRa3k_8UrxqkgO6SRfMbT-ACKgBGAs/s1600/P8201742.JPG https://3.bp.blogspot.com/-QKUH9JJBu3U/WZpmYS2zzrI/AAAAAAAApco/gfKAnEapm_wqxxOQ-9WEcKVVBNTxjJqqwCKgBGAs/s1600/P8201744.JPG With my fake can because Canada. https://1.bp.blogspot.com/-oqjNponc7zw/WZpmYaGQveI/AAAAAAAApco/a0DC263UaaMQ-4BxaZeJvOq7xsAwX_ffQCKgBGAs/s1600/P8201745.JPG https://4.bp.blogspot.com/-UhjKFbK7c1E/WZpmYQZ9tCI/AAAAAAAApco/G5rTKOQUN3wZfEWWDU1bKc1ot1UcBngfQCKgBGAs/s1600/P8201747.JPG https://2.bp.blogspot.com/-lcGZ2o7VHFk/WZpmYdWTQVI/AAAAAAAApco/r41Ct1gQ6hkijJMuVS2qqO-1t6cfbEghQCKgBGAs/s1600/P8201749.JPG https://1.bp.blogspot.com/-6otHHCCwb_U/WZpmRfxRa3I/AAAAAAAApck/T2GY_5MzjMwVCqcxsPDgptMqnX2NQ1IRQCKgBGAs/s1600/P8201758.JPG https://2.bp.blogspot.com/-nLOLY5Brvyc/WZpmRXH7NfI/AAAAAAAApck/p_HTNF63vvQ3UylWw1F5ZpSPOs40QAnrwCKgBGAs/s1600/P8201759.JPG That's it for now. I have however been entertaining the idea of doing up a Block II build for a while now. It's just such a costly build that I've never seriously looked into it. I think if I do go that route, I may have to compromise a lot more than with my Mk12 build, for instance, the PEQ15. For my personal requirements, it has no use whatsoever because first, I don't have NVGs, and second, even if I did, there's no place around here for me to run them (local ranges don't have night shoots, and as far as I know, there aren't any matches held at night). Though it does look cool having all that stuff bolted onto the front end of a very short rifle, I may look into getting an Airsoft clone just for pics (lol, like my fake suppresors). Anyway, I may or may not have taken the first step down a very dark path and I pray my wife never finds out, or that I come to my senses and start doing the math on how much this could possibly cost me (even without a real PEQ 15). https://1.bp.blogspot.com/-gG7uPXhQ6vs/WZOBiIyT5-I/AAAAAAAApUw/CToSHQg_QNcsOkTxrtECtOYdX8qgRJbJQCKgBGAs/s1600/P8141228.JPG |
|
|
Originally Posted By Mister_Donut:
I can't tell if serious or not. View Quote View All Quotes View All Quotes Originally Posted By Mister_Donut:
Originally Posted By SecretSquirell:
Originally Posted By M4A1SOPMOD:
Originally Posted By Mister_Donut:
So, something that's been bugging me for a while is the last decent photo I took of my Mk18 Mod 0 build. I installed the KAC handguard incorrectly, with the front tab sticking out of the handguard cap. Someone kindly pointed this out and though I corrected it, I never bothered to update the thread with any pics (proof that I understand instruction and I'm not completely devoid of intelligence, lol!). https://1.bp.blogspot.com/-W_eixK0g92s/WZpmYdTrafI/AAAAAAAApco/hhyeuiVr6xoUjjYUWdLDwnUm05mijOU9wCKgBGAs/s1600/P8201735.JPG Anyway, it was a sunny day and I figured I'd snap a few photos of the rifle. https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Apparently the Vero Beach marked covers are collectable? https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Markings on the RIS are in odd numbers, one of the indicators that it's a RIS, not the newer RAS? https://1.bp.blogspot.com/-OYRfd4Q9itk/WZpmYZ27_lI/AAAAAAAApco/5yC1Ro7euyUjGLyND_uGnhVlMzQ7cP7oQCKgBGAs/s1600/P8201739.JPG https://3.bp.blogspot.com/-W7hMYzKz2Ss/WZpmYbNkD1I/AAAAAAAApco/fwNw1mZE4TIwTfDnDsRIjt54hmE-7YFiQCKgBGAs/s1600/P8201740.JPG Until I receive my SR-15 stripped lower from One Shot Tactical, my Mk12 and Mk18 are sharing lowers. https://2.bp.blogspot.com/--A_XM0KyVG4/WZpmYXt-64I/AAAAAAAApco/RH9l3R4gIG0uWDX_evrgWudmvApqmlvKQCKgBGAs/s1600/P8201741.JPG I'm going to have to do something about the buttpad on the LMT SOPMOD. They list for about $15 from B5 Systems, but God knows how much these will cost in Canada, if I can get them all all. Then I have to figure out how to get the buttpad off, lol! https://1.bp.blogspot.com/-Wad7jHE7rxQ/WZpmYZYYLMI/AAAAAAAApco/qf5hY9Rpl9QRa3k_8UrxqkgO6SRfMbT-ACKgBGAs/s1600/P8201742.JPG https://3.bp.blogspot.com/-QKUH9JJBu3U/WZpmYS2zzrI/AAAAAAAApco/gfKAnEapm_wqxxOQ-9WEcKVVBNTxjJqqwCKgBGAs/s1600/P8201744.JPG With my fake can because Canada. https://1.bp.blogspot.com/-oqjNponc7zw/WZpmYaGQveI/AAAAAAAApco/a0DC263UaaMQ-4BxaZeJvOq7xsAwX_ffQCKgBGAs/s1600/P8201745.JPG https://4.bp.blogspot.com/-UhjKFbK7c1E/WZpmYQZ9tCI/AAAAAAAApco/G5rTKOQUN3wZfEWWDU1bKc1ot1UcBngfQCKgBGAs/s1600/P8201747.JPG https://2.bp.blogspot.com/-lcGZ2o7VHFk/WZpmYdWTQVI/AAAAAAAApco/r41Ct1gQ6hkijJMuVS2qqO-1t6cfbEghQCKgBGAs/s1600/P8201749.JPG https://1.bp.blogspot.com/-6otHHCCwb_U/WZpmRfxRa3I/AAAAAAAApck/T2GY_5MzjMwVCqcxsPDgptMqnX2NQ1IRQCKgBGAs/s1600/P8201758.JPG https://2.bp.blogspot.com/-nLOLY5Brvyc/WZpmRXH7NfI/AAAAAAAApck/p_HTNF63vvQ3UylWw1F5ZpSPOs40QAnrwCKgBGAs/s1600/P8201759.JPG That's it for now. I have however been entertaining the idea of doing up a Block II build for a while now. It's just such a costly build that I've never seriously looked into it. I think if I do go that route, I may have to compromise a lot more than with my Mk12 build, for instance, the PEQ15. For my personal requirements, it has no use whatsoever because first, I don't have NVGs, and second, even if I did, there's no place around here for me to run them (local ranges don't have night shoots, and as far as I know, there aren't any matches held at night). Though it does look cool having all that stuff bolted onto the front end of a very short rifle, I may look into getting an Airsoft clone just for pics (lol, like my fake suppresors). Anyway, I may or may not have taken the first step down a very dark path and I pray my wife never finds out, or that I come to my senses and start doing the math on how much this could possibly cost me (even without a real PEQ 15). https://1.bp.blogspot.com/-gG7uPXhQ6vs/WZOBiIyT5-I/AAAAAAAApUw/CToSHQg_QNcsOkTxrtECtOYdX8qgRJbJQCKgBGAs/s1600/P8141228.JPG |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
|
Originally Posted By FullAutoHound:
Except like he said, no FA lowers up in here so all fake. Moot thread. Not clone correct so that means there is wiggle room. Where do you draw the line? Who is the official governing body who decides? Few FA exceptions maybe? View Quote View All Quotes View All Quotes Originally Posted By FullAutoHound:
Originally Posted By pezboytate:
"Official Mk 18, CQBR, Clone only, or GTFO thread" Well, there you go. Few FA exceptions maybe? |
|
|
|
Originally Posted By carmodyh:
BOONEA, what riser is that under your eotech? I need some more height in my life like you have there... thanks! View Quote |
|
|
Originally Posted By azoutdoorsman:
https://www.AR15.Com/media/mediaFiles/81153/20170827_193801-292387.JPG View Quote Is optics planet with a discount still the best place to source a new EXPS3 these days? I feel like that was the spot that used to be passed around the most. Thanks for the word on that riser. Fingers crossed it's cheaper than the Wilcox |
|
|
|
|
Originally Posted By Dobs013:
Still need to pick up a brace for now and get an a1 grip and some new retaining clips for the G2S so I can ditch he kns pins....but it's coming along. http://sl.uploads.im/t/RZhGK.jpg View Quote Also nice paint job, i like that. |
|
|
Originally Posted By Jormungandr:
which brace are you going to get? i got this KAK since it was pretty cheap for the brace/tube/buffer/spring. Also nice paint job, i like that. View Quote View All Quotes View All Quotes Originally Posted By Jormungandr:
Originally Posted By Dobs013:
Still need to pick up a brace for now and get an a1 grip and some new retaining clips for the G2S so I can ditch he kns pins....but it's coming along. http://sl.uploads.im/t/RZhGK.jpg Also nice paint job, i like that. |
|
|
Originally Posted By SecretSquirell:
I can't tell either. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell:
Originally Posted By Mister_Donut:
Originally Posted By SecretSquirell:
Originally Posted By M4A1SOPMOD:
Originally Posted By Mister_Donut:
So, something that's been bugging me for a while is the last decent photo I took of my Mk18 Mod 0 build. I installed the KAC handguard incorrectly, with the front tab sticking out of the handguard cap. Someone kindly pointed this out and though I corrected it, I never bothered to update the thread with any pics (proof that I understand instruction and I'm not completely devoid of intelligence, lol!). https://1.bp.blogspot.com/-W_eixK0g92s/WZpmYdTrafI/AAAAAAAApco/hhyeuiVr6xoUjjYUWdLDwnUm05mijOU9wCKgBGAs/s1600/P8201735.JPG Anyway, it was a sunny day and I figured I'd snap a few photos of the rifle. https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Apparently the Vero Beach marked covers are collectable? https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Markings on the RIS are in odd numbers, one of the indicators that it's a RIS, not the newer RAS? https://1.bp.blogspot.com/-OYRfd4Q9itk/WZpmYZ27_lI/AAAAAAAApco/5yC1Ro7euyUjGLyND_uGnhVlMzQ7cP7oQCKgBGAs/s1600/P8201739.JPG https://3.bp.blogspot.com/-W7hMYzKz2Ss/WZpmYbNkD1I/AAAAAAAApco/fwNw1mZE4TIwTfDnDsRIjt54hmE-7YFiQCKgBGAs/s1600/P8201740.JPG Until I receive my SR-15 stripped lower from One Shot Tactical, my Mk12 and Mk18 are sharing lowers. https://2.bp.blogspot.com/--A_XM0KyVG4/WZpmYXt-64I/AAAAAAAApco/RH9l3R4gIG0uWDX_evrgWudmvApqmlvKQCKgBGAs/s1600/P8201741.JPG I'm going to have to do something about the buttpad on the LMT SOPMOD. They list for about $15 from B5 Systems, but God knows how much these will cost in Canada, if I can get them all all. Then I have to figure out how to get the buttpad off, lol! https://1.bp.blogspot.com/-Wad7jHE7rxQ/WZpmYZYYLMI/AAAAAAAApco/qf5hY9Rpl9QRa3k_8UrxqkgO6SRfMbT-ACKgBGAs/s1600/P8201742.JPG https://3.bp.blogspot.com/-QKUH9JJBu3U/WZpmYS2zzrI/AAAAAAAApco/gfKAnEapm_wqxxOQ-9WEcKVVBNTxjJqqwCKgBGAs/s1600/P8201744.JPG With my fake can because Canada. https://1.bp.blogspot.com/-oqjNponc7zw/WZpmYaGQveI/AAAAAAAApco/a0DC263UaaMQ-4BxaZeJvOq7xsAwX_ffQCKgBGAs/s1600/P8201745.JPG https://4.bp.blogspot.com/-UhjKFbK7c1E/WZpmYQZ9tCI/AAAAAAAApco/G5rTKOQUN3wZfEWWDU1bKc1ot1UcBngfQCKgBGAs/s1600/P8201747.JPG https://2.bp.blogspot.com/-lcGZ2o7VHFk/WZpmYdWTQVI/AAAAAAAApco/r41Ct1gQ6hkijJMuVS2qqO-1t6cfbEghQCKgBGAs/s1600/P8201749.JPG https://1.bp.blogspot.com/-6otHHCCwb_U/WZpmRfxRa3I/AAAAAAAApck/T2GY_5MzjMwVCqcxsPDgptMqnX2NQ1IRQCKgBGAs/s1600/P8201758.JPG https://2.bp.blogspot.com/-nLOLY5Brvyc/WZpmRXH7NfI/AAAAAAAApck/p_HTNF63vvQ3UylWw1F5ZpSPOs40QAnrwCKgBGAs/s1600/P8201759.JPG That's it for now. I have however been entertaining the idea of doing up a Block II build for a while now. It's just such a costly build that I've never seriously looked into it. I think if I do go that route, I may have to compromise a lot more than with my Mk12 build, for instance, the PEQ15. For my personal requirements, it has no use whatsoever because first, I don't have NVGs, and second, even if I did, there's no place around here for me to run them (local ranges don't have night shoots, and as far as I know, there aren't any matches held at night). Though it does look cool having all that stuff bolted onto the front end of a very short rifle, I may look into getting an Airsoft clone just for pics (lol, like my fake suppresors). Anyway, I may or may not have taken the first step down a very dark path and I pray my wife never finds out, or that I come to my senses and start doing the math on how much this could possibly cost me (even without a real PEQ 15). https://1.bp.blogspot.com/-gG7uPXhQ6vs/WZOBiIyT5-I/AAAAAAAApUw/CToSHQg_QNcsOkTxrtECtOYdX8qgRJbJQCKgBGAs/s1600/P8141228.JPG |
|
|
Originally Posted By NemesisMind:
Good thing then that that's not a MK18. View Quote But it's a clone thread. By definition in order to be a clone it needs to look the same. That's it. Not, "has all the parts but lower or else we will have a hissy fit" So if it looks the same it's a clone and should be allowed. *definition of clone took straight from Merriam-Webster |
|
|
|
Removed
|
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
One who lifts heavy weight, sets back down, then repeats. One who Colt's/FN's all the things. |
Don't remember what model I had (had Allen screws) but that tab was installed in the handgaurd cap
|
|
|
|
Originally Posted By Eyekahn:
Back like crack. https://i.imgur.com/4FRxwPi.jpg https://i.imgur.com/wHzoLPa.jpg View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
|
Can someone point me in the right direction for where I can grab a Colt Mod 0 lower?
Also, a Colt Block 1 lower... |
|
|
Originally Posted By TNW:
I'd love to see that fully painted and with a CAR stock. Really well done. Is optics planet with a discount still the best place to source a new EXPS3 these days? I feel like that was the spot that used to be passed around the most. Thanks for the word on that riser. Fingers crossed it's cheaper than the Wilcox View Quote |
|
|
Originally Posted By MILSPEC556:
Your rail is a KAC M4 RAS. The tab goes in the hand guard cap. The KAC M4 RIS has one roll pin hole on the side of the top rail (hand guard cap end only) as the mounting screw secures in the front of the rail, and the T marks are numbered backwards of standard. Your top rail has 2 roll pins (one on each side) Yours is an M4 RAS. Tab goes in the handguard cap. Dude doesn't know what he's talking about. ETA this is a KAC M4 RIS. Notice the screw in front and backwards T marks. http://i.imgur.com/1gfmLbD.jpg KAC M4 RAS- note 2 roll pins, screw in rear and standard T marking- http://i.imgur.com/QmdllFs.jpg View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By Mister_Donut:
Originally Posted By M4A1SOPMOD:
The RIS doesnt work like the RAS. https://2.bp.blogspot.com/-UdGWu4VENDo/WED6iPL7OxI/AAAAAAAAk8g/oiD2H3pw1sAT8QK0gXgnyFcT57myYODUACPcB/s1600/PC012718.JPG And not this?: https://1.bp.blogspot.com/-dk1SeikM9zg/WZpmYdsDKQI/AAAAAAAApco/nAR92jkeLlsfxUkulzL2v4vTiKcbmwuuACKgBGAs/s1600/P8201737.JPG Yours is an M4 RAS. Tab goes in the handguard cap. Dude doesn't know what he's talking about. ETA this is a KAC M4 RIS. Notice the screw in front and backwards T marks. http://i.imgur.com/1gfmLbD.jpg KAC M4 RAS- note 2 roll pins, screw in rear and standard T marking- http://i.imgur.com/QmdllFs.jpg Actually, some of the misinformation about the RIS and RAS was my fault. Here's a top view of the rail I have on there now (missing a screw, but still tight). I had another rail on there for a while that was even numbers, and that is the one in the first pic of my post Still have lots to learn about this build. |
|
|
Originally Posted By Mister_Donut:
Hey, thanks for the info. I thought I was losing my mind with the tab thing. Here's a top view of my rail, again, due to someone misinforming me, I thought this whole time I had the RIS simpky because the markings were odd numbers. https://2.bp.blogspot.com/-UrbK_I9q7R8/WZpmYYWg7NI/AAAAAAAApco/6pJzJomkuhUww9bOCoxKdwmaZqmZgb5AACKgBGAs/s1600/P8201738.JPG Still have lots to learn about this build. View Quote |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
One who lifts heavy weight, sets back down, then repeats. One who Colt's/FN's all the things. |
|
Funny, I saw many issued M4's with that tab sticking out. It is sticking out because someone did not know how to install the rail correctly. I had to fix my own issued M4 because mine had the same problem. Usually that is an armorer job but because I had installed my own on my personal M4gery. That tab tucks under the HG retainer cap.
|
|
If U can't Truck It F!@k It!
|
Originally Posted By imdBman:
Funny, I saw many issued M4's with that tab sticking out. It is sticking out because someone did not know how to install the rail correctly. I had to fix my own issued M4 because mine had the same problem. Usually that is an armorer job but because I had installed my own on my personal M4gery. That tab tucks under the HG retainer cap. View Quote I had a unit armorer who couldn't put a fire control group back together or install a KAC rail for that matter... wasn't a gun dude |
|
|
Originally Posted By Mister_Donut:
Pics of my two sets of rails side by side before removing the paint. https://1.bp.blogspot.com/-SwyCy2GcclU/V9w2_Yu9tgI/AAAAAAAAj8U/CmLejWqfnPULze-nubWcGBuHgfWPpJE_ACPcB/s1600/P9160413.JPG https://4.bp.blogspot.com/-SyHrJ8Rei2o/V9w2_cztaMI/AAAAAAAAj8U/q2yZTlsBqvw795r0wWJuNz5keRROxcddgCPcB/s1600/P9160416.JPG RIS or RAS, is there any instance where this tab is sticking out of the hand guard cap? https://4.bp.blogspot.com/-NqjtYi3RSPI/V9w2_bOsgmI/AAAAAAAAj8U/CJY1EzM-jGwK3KqlneJmj7pOn2gvwXZXwCPcB/s1600/P9160418.JPG View Quote |
|
|
|
Originally Posted By carmodyh:
unit armorer = YMMV I had a unit armorer who couldn't put a fire control group back together or install a KAC rail for that matter... wasn't a gun dude View Quote View All Quotes View All Quotes Originally Posted By carmodyh:
Originally Posted By imdBman:
Funny, I saw many issued M4's with that tab sticking out. It is sticking out because someone did not know how to install the rail correctly. I had to fix my own issued M4 because mine had the same problem. Usually that is an armorer job but because I had installed my own on my personal M4gery. That tab tucks under the HG retainer cap. I had a unit armorer who couldn't put a fire control group back together or install a KAC rail for that matter... wasn't a gun dude |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By carmodyh:
unit armorer = YMMV I had a unit armorer who couldn't put a fire control group back together or install a KAC rail for that matter... wasn't a gun dude View Quote He spent the first two years of his career fixing lanterns and mobile kitchens, but we're reservists, so I'm not sure how the full time guys progress in their training. That being said, we have some very competent weapons techs as well, who actually enjoy their trade and know their stuff. Anyway, thanks all for the info. |
|
|
Originally Posted By Mister_Donut:
Pics of my two sets of rails side by side before removing the paint. https://1.bp.blogspot.com/-SwyCy2GcclU/V9w2_Yu9tgI/AAAAAAAAj8U/CmLejWqfnPULze-nubWcGBuHgfWPpJE_ACPcB/s1600/P9160413.JPG https://4.bp.blogspot.com/-SyHrJ8Rei2o/V9w2_cztaMI/AAAAAAAAj8U/q2yZTlsBqvw795r0wWJuNz5keRROxcddgCPcB/s1600/P9160416.JPG RIS or RAS, is there any instance where this tab is sticking out of the hand guard cap? https://4.bp.blogspot.com/-NqjtYi3RSPI/V9w2_bOsgmI/AAAAAAAAj8U/CJY1EzM-jGwK3KqlneJmj7pOn2gvwXZXwCPcB/s1600/P9160418.JPG View Quote |
|
|
Ugh....AU has a deal going on Surefire SOCOM-RC suppressors again. I want to pull the trigger but I don't want a repeat of the last debacle. What do they say.....fool me once shame on you, fool me twice shame on me.
|
|
|
Originally Posted By LongTrang:
Ugh....AU has a deal going on Surefire SOCOM-RC suppressors again. I want to pull the trigger but I don't want a repeat of the last debacle. What do they say.....fool me once shame on you, fool me twice shame on me. View Quote |
|
On Time. On Target.
|
Originally Posted By LongTrang:
Ugh....AU has a deal going on Surefire SOCOM-RC suppressors again. I want to pull the trigger but I don't want a repeat of the last debacle. What do they say.....fool me once shame on you, fool me twice shame on me. View Quote |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.