AR Sponsor
Posted: 5/15/2011 1:57:11 PM EDT
|
I have been wanting to build a complete FDE rifle for awhile. After deciding on parts and waiting for them to show I finally got it together.
Build has the following parts- WOA 18" SPR barrel Mega upper Spikes Lower YM BCG Centurion rail Magpul UBR stock 
I used a barrel dimpler from Rainier Arms to get the Vltor gas block in the right position- 
Cerakoted everything in FDE- 
The rifle starting to go together- LPK- 
Lower going together- 
Reassembling the upper- 
Finished product- 
Ill be installing a Viper Vortex PST 2.5-10 in a Larue mount when they show up. |
|
Quoted:
That is a beautiful thing. I also would like you to post your Cerakote methods too. I use the air dry Cerakote and an airbrush. I learned a trick from the guy that showed me how to Cerakote, after getting the Cerakote applied I leave them in a hot box(a box I built with 100 watt light bulbs iinside). The box temperature gets to 130 degrees and I leave the parts in there for 12 hours. I'm sure it's not as durable as the baking method but I haven't had any damage or scratches to the Cerakote using this method. I'll try to do a picture tutorial one day, it's hard to take pictures and do all the necessary steps at the same time. |
AR Sponsor