AR Sponsor
Posted: 2/4/2012 5:00:07 PM EDT
|
I just picked up a new (to my anyway) Colt Match Target Competition HBAR II, Rifling looks good and it had a cleaning kit in the buttstock (that I'm not sure if it came with the gun or if somebody put it there afterwards, looks like it's never been used)
pushed a patch through the bore with a bit of oil, looks shiny as can be, so I'm pretty pleased. Gonna head out tomorrow to go put a few hundred rounds through it and see how it performs. http://img859.imageshack.us/img859/6017/newcolt.jpg |
|
Quoted:
So, it's got me wondering, what would i need to do to get a flash suppressor put on the barrel? Easiest (albeit not cheapest route) is to send the upper to adco. You'll pay for disassembly, threading, and reassembly. After that, just buy a flash hider and install correctly (it should come with some washers so that it can be installed properly) Shouldnt be too expensive (I''ve figured out how much it is before, just cant remember). Itd be even cheaper if you only sent the barrel to them though (no dis/re-assembly costs) |
AR Sponsor