AR Sponsor
Posted: 5/26/2016 9:55:26 PM EDT
| What is the actual length of an NSR-11 handguard? Will the thread shoulder on a 11.5 barrel be shorter or longer than the end of the handguard? |
|
Skip to the bold for the specs.
It's actually 11.1" the threads on a noveske barrel are .6". So while the above poster may have got his asr mount to work I on the other hand had to cut down a 12.5" barrel to 11.75" to get the SiCo trifecta mount to work. I'm actually having a hard time believing the above poster. Iv done my research and I'm not the first person to want the NSR Rail to work and mate with only a slight gap. Also you need some room between the rail and the suppressor for barrel whip. And just in case you think I didn't think of it yes a spacer would work but it would.have to be about 1/4" and that's pretty big when the threads are only. 6" long. Also the spacer may cause the mount to not be true or concentric. I don't know what your planning but I hope this all helps. So nsr rail 11.1" the 11.5" barrel minute the. 6" threads equals 10.9" so the threads recess. 2" under the rail. |
|
Thanks for the pics and info.
I have a Griffin Armament Recce7 which mounts to their taper mounts. The end of the taper mount is flat so I'll need the shoulder be in front of the NSR. From other pictures of the ASR mount it looks like there is some additional length which gives him the extra space to mount it with the NSR11. |
|
Quoted:
Well you can apologize for calling me a liar. Purchase confirmation because you can't see the barrel logo through the nsr http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/Screenshot_20160526-222847_zpsfovfuryx.png http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_221806_zpsmk7xrkvr.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_221824_zpsc8x5txye.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_222136_zpsclwcu1cc.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_222148_zpsbkj4a7ds.jpg So nice. |
|
Quoted:
So nice. Quoted:
Quoted:
Well you can apologize for calling me a liar. Purchase confirmation because you can't see the barrel logo through the nsr http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/Screenshot_20160526-222847_zpsfovfuryx.png http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_221806_zpsmk7xrkvr.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_221824_zpsc8x5txye.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_222136_zpsclwcu1cc.jpg http://i1075.photobucket.com/albums/w424/cfaulkner0006/Mobile%20Uploads/20160526_222148_zpsbkj4a7ds.jpg So nice. Thanks. It is by far my favorite rifle I own. |
|
Quoted:
I didn't call you a liar and to be fair you said it works but that's not true for every setup. Your answer was in fact misleading. Anyway nice setup. from those who know is that suppressor to close to the rail or will it be fine? The 5k rounds I have through it say that it's fine. |
AR Sponsor