AR Sponsor
Posted: 4/26/2003 1:35:22 PM EDT
|
I installed a Jewell trigger and everything has been great for about 1000 or 2000 shots .It now has a light hammer fall when the trigger is gently pulled (as in click only) although it fires when the trigger is pulled with more speed .I dissasembled cleaned and reassebbled and adjusted as per instructions . I also tried more or less sear engagement and more or less overtravel .(thought I might have been adjusting too close to some line ) When I take the lower only and pull the trigger while holding the hammer and slowly letting it spring foward it has a partial "Hitch" or "bump" about 3/4 of the way foward . Is this normal or is this my problem ? I Have spent some time and can't see anything causeing what seems to be some kind of interference os the hammer travels foward . Thanks for any help NHSPORT |
|
It sounds like the overtravel to me. Check to see if the hammer is hitting at the front of the trigger where it has the "bump". If so, try resetting the overtravel. Edited to add--did you make sure to get it clean? If it has solvent or gunk in it, it will screw up also. |
AR Sponsor