AR Sponsor
Posted: 1/29/2010 10:12:03 AM EDT
| Alright guys newb questain just dont want to screw up a just finished $2k build.. got all my parts put it all together, everything looks and feels great ... but now what should i do to ensure my rifle runs and operates as smooth as possible? basically when time comes to shoot it at the range or wherever i dont want to be worried about parts not working smothly and so on... well hope someone understands what im asking,, suggestions? |
|
There is a good post somewhere here about lube points, type and amount. I go a bit overboard on breakin. Dry patch chamber and bore. Function check trigger group. Two or three rounds only in first mag. Slam bolt home. Have fun.
Some people like to follow a specific breakin procedure for the barrel. If it is chrome lined I don’t. If this was your first build after a hundred rounds or so check and make sure nothing has come loose. |
|
I use Break Free Lubricant Protectant (sometimes called LP) for lube. It seems to stay in place better and doesn't "evaporate" like CLP does. I use CLP for cleaning and for protecting the outside finish of the gun from rust. Apply generous lube to the bolt carrier group (I basically cover mine in it) but make sure the bore/barrel is clean and dry. Shoot some ammo, have fun. Personally, I don't buy into barrel break-ins at all. Just shoot slowly if you want to be as gentle as possible to the gun... One shot every 10 seconds or so should be fine. Just don't take a brand new rifle and bump fire off 200 rounds and you should be fine. |
... hmmmm whats next now order every acessorie i can find or start a new build ... im not used to having money not leave my bank once i put it in hahaha
|
http://www.ar15.com/content/guides/functionCheck/ That's the basic function check. It just checks the workings of your safety and fire control group. |
|
Quoted:
thanks for ur help guys... Krylancelo i think u know what im looking for now what r the basic function tests i should preform... i know how to use and operate my setup just dont know all the terms and what not. These 2 manuals are invaluable: http://www.ar15.com/content/manuals/TM9-1005-319-10.pdf http://www.ar15.com/content/manuals/TM9-1005-319-23.pdf |
|
I believe one thing that is overlooked is making sure your bolt assy. is very well lubed and "wet".
I use Mil-comm TWB 25B oil. This a LP (lube-protector) and one of the best! I have heard more than one complaint of problems with new AR's being traced back to a dry BCG. Sloppy wet BCG is good. |
AR Sponsor