[ARCHIVED THREAD] - Problem with Building Lower AR 15

Posted: 11/9/2008 1:03:18 PM EDT

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=830407

Here is my post..no solution yet ..Please copy and paste in your browser and see if you can help me solve my gunsmithing problem.

In short the selector hits my RRA Single Stage NM triggger preventing firing, but when the selector is removed..no problem.Doesn't matter from what side I put in the selector...still will not drop hammer when it is in place. I started this thread on another forum and still do not have the answer yet..This is supposed to be a drop in trigger. HMMMM??

Posted: 11/9/2008 1:05:53 PM EDT

[#1]

Nothing is drop in...Check and see if there is any flashing on the bottom of the trigger near the rear where the safety passes over. A little filing there may help.

Posted: 11/10/2008 12:16:16 PM EDT

[#2]

http://www.ar15.com/forums/topic.html?b=3&f=66&t=404557

Posted: 11/10/2008 12:34:26 PM EDT

[#3]

The selector is on the wrong side; in this position pointing it to the rear would actualy fire the gun

[ARCHIVED THREAD] - Problem with Building Lower AR 15

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Problem with Building Lower AR 15

[ARCHIVED THREAD] - Problem with Building Lower AR 15