AR Sponsor
Posted: 11/11/2012 9:19:27 PM EDT
|
I'm considering getting one of the midwest industries gen 2 ss free float handgaurd. I want to change out the FSB to their low profile gas block.
How hard is it to remove the pins on the sight? is there a really small pin holding the gas tube in the FSB? It looks like there is. I have seen guys chop and reshape them, but I would prefer to remove it. It has the bayonet lug and I just don't really want to destroy it, its got sentimental value,  .
The pins look the same on each side, they are directional though right? Any info would be appreciated. |
|
Quoted:
I'm considering getting one of the midwest industries gen 2 ss free float handgaurd. I want to change out the FSB to their low profile gas block. How hard is it to remove the pins on the sight? is there a really small pin holding the gas tube in the FSB? It looks like there is. I have seen guys chop and reshape them, but I would prefer to remove it. It has the bayonet lug and I just don't really want to destroy it, its got sentimental value, .
The pins look the same on each side, they are directional though right? Any info would be appreciated. There is a roll pin holding the gas tube. The FSB pins are usually tapered and usually driven in from starboard to port. Removing FSB taper pins |
AR Sponsor