[ARCHIVED THREAD] - Spikes Bar rail help!

Posted: 3/10/2012 5:10:55 PM EDT

I am switching the bar rail to another build. Does anyone have the instruction sheet laying around? I can't get the screw holes for the rail to line up for the life of me. I can't remember if there was some trick to it or not.

Posted: 3/10/2012 5:27:24 PM EDT

[#1]

You have to use the shims that are included with the BAR. If the nut isn't close to lining up, take it off and add a shim. Rinse and repeat until it's close enough to torque into place.

I have the instruction sheet, but no way to digitize it for you at the moment.

Posted: 3/10/2012 5:31:51 PM EDT

[#2]

I have 2 shims, but is closer with none. But still would have to torque it way to much!

Posted: 3/10/2012 6:01:11 PM EDT

[#3]

My rail came with, like, 6 shims I think. You might need to order a shim kit from Spike's if you don't have enough.

Posted: 3/10/2012 7:55:26 PM EDT

[#4]

Friend of mine has one and I helped him assemble it. You don't have enough shims. There are 2 different thicknesses and you need to use whichever combo brings you to one clock position shy at hand tight.

[ARCHIVED THREAD] - Spikes Bar rail help!

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Spikes Bar rail help!

[ARCHIVED THREAD] - Spikes Bar rail help!