AR Sponsor
UID stickers (Page 1 of 11)
Posted: 5/18/2017 2:59:32 AM EDT
[Last Edit: ArkansasScout3187][Edited]
| I'm looking to purchase a few for some recent builds. I thought there might be some one on the forum that makes them or at least point me in the right direction. Thank you. |
|
eBay.
We ran some in the past in the clone groups but a) someone has to take on the project, b) it wasn't appreciated by site staff and c) they're on the expensive side, especially the set-up costs. |
"I'll tell you what war is about, you've got to kill people, and when you've killed enough they stop fighting." GEN Curtis LeMay
"Someday this war's gonna end..." LTC William Kilgore
"Someday this war's gonna end..." LTC William Kilgore
|
Originally Posted By airmandaniel:
Here ya go! https://carolinalaserworks.ecwid.com/Custom-UID-tag-for-M-4-Carbine-1-5-x-5-p82703152 |
| I asked them about that earlier in that thread. They said the first labels they got had square corners... the current labels they have come with rounded corners. I still think his labels are not aesthetically 100%, but they are pretty close. |
|
You can make any type of label you want here: http://barcode.tec-it.com/en
Getting them printed "authentically" is another story. Good luck. |
|
Originally Posted By car10107:
Has anyone ordered from this company? The label they show on the paper backer looks great and has nice rounded corners. The second picture the company shows with the label on a lower doesn't look right (IMO) because the corners are square and looks like it was cut from a larger sheet with scissors. Just wondering which type they supply? edit. I ordered late at night and they shipped early next day. so far so good EDIT: UID arrived today and looks good! nice rounded corners. Placing order for a second for my m16a4 build |
|
Any rhyme or reason to what sticker's used when? Like these square & circular ones?
Attached File Attached File |
|
Got my sticker from Carolina Laser Works yesterday. It was $11 shipped and I ordered it on the day I last posted in this thread.
It's printed on some kind of metallic backing which is nice. It seems really high quality, although I've never handled a real UID sticker so I wouldn't know. Here's a photo. 
|
|
Originally Posted By airmandaniel:
Here ya go! https://carolinalaserworks.ecwid.com/Custom-UID-tag-for-M-4-Carbine-1-5-x-5-p82703152 
|
|
Originally Posted By usjet:
Not to be "that guy", but the NSN part number for an M4 Carbine is: 1005-01-231-0973. For those wanting one for a clone build... I believe these are correct numbers below. M4 CAGE: Part Number: 9390000 Serial: M4A1 CAGE: Part Number: 12972700 Serial: M16A4 CAGE: Part Number: 12973001 Serial: Many manufacturers have CAGE codes besides Colt & FN. Do a Google search and you'll often find they're registered. I wish this Carolina place would make the square labels too. Anyone know if the square ones are used now in place of the rectangular? Like these: Attached File |
|
Originally Posted By C6H12O6:
I've never seen one of these IUID stickers that features an NSN. The formats I've seen have had CAGE codes, the mil part number (not NSN) and serial. For those wanting one for a clone build... I believe these are correct numbers below. M4 CAGE: Part Number: 9390000 Serial: M4A1 CAGE: Part Number: 12972700 Serial: M16A4 CAGE: Part Number: 12973001 Serial: Many manufacturers have CAGE codes besides Colt & FN. Do a Google search and you'll often find they're registered. I wish this Carolina place would make the square labels too. Anyone know if the square ones are used now in place of the rectangular? Like these: https://www.AR15.Com/media/mediaFiles/123535/IMG-4912-220237.JPG 
|
That's why they sent me, I am expert
Joined:
Jul 2008
Posts:
24344
EE: 100% (207)
TN, USA
|
Originally Posted By C6H12O6:
I've never seen one of these IUID stickers that features an NSN. The formats I've seen have had CAGE codes, the mil part number (not NSN) and serial. For those wanting one for a clone build... I believe these are correct numbers below. M4 CAGE: Part Number: 9390000 Serial: M4A1 CAGE: Part Number: 12972700 Serial: M16A4 CAGE: Part Number: 12973001 Serial: Many manufacturers have CAGE codes besides Colt & FN. Do a Google search and you'll often find they're registered. I wish this Carolina place would make the square labels too. Anyone know if the square ones are used now in place of the rectangular? Like these: https://www.AR15.Com/media/mediaFiles/123535/IMG-4912-220237.JPG I guess I didn't search enough. Too late, ordered late Sunday, shipped Tuesday. Carolina laser works is fast! You're right about cage codes- there are thousands! Need a coffee maker?: 25628- Bunn O Matic Corp. 
|
I was gonna just fade away, and here I am.
|
Originally Posted By C6H12O6:
I've never seen one of these IUID stickers that features an NSN. The formats I've seen have had CAGE codes, the mil part number (not NSN) and serial. For those wanting one for a clone build... I believe these are correct numbers below. M4 CAGE: Part Number: 9390000 Serial: M4A1 CAGE: Part Number: 12972700 Serial: M16A4 CAGE: Part Number: 12973001 Serial: Many manufacturers have CAGE codes besides Colt & FN. Do a Google search and you'll often find they're registered. I wish this Carolina place would make the square labels too. Anyone know if the square ones are used now in place of the rectangular? Like these: https://www.AR15.Com/media/mediaFiles/123535/IMG-4912-220237.JPG 
Do you anyone know the part number for a M16A2? I figure they probably have labels now since some units still have them. |
|
Originally Posted By KitBuilder:
9349000 M16A3Â 12012000 M16A4Â 12973001 Originally Posted By KitBuilder:
Originally Posted By grondike:
Do you anyone know the part number for a M16A2? I figure they probably have labels now since some units still have them. M16A3Â 12012000 M16A4Â 12973001 |
|
Originally Posted By C6H12O6:
Colt is doing this now too Originally Posted By C6H12O6:
Originally Posted By getchevyn:
Originally Posted By ROMAD-556:
Just picked up a LMT lower and there's a UID square engraved into the lower 
Pictures needed.
|
Filthy sinner saved by grace
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
"9mm gets the job done!" - Trayvon Martin (GTwannabe)
|
Originally Posted By KitBuilder:
M4A1 is PN 12972700 These are what the square ones look like. https://c1.staticflickr.com/9/8829/17650496682_0d968e5f83_k.jpg |
|
Forgive the newb question but what the hell is a cage code? That like a batch #?
Im so putting one of these on the Colt 6920 OEM1 I just built and I will get more whenever the next damn shipment of Colt AR15A4's finally comes out. |
Unless we keep the barbarian virtues, gaining the civilized ones will be of little avail. Oversentimentality, oversoftness, washiness, and mushiness are the great dangers of this age and of this people." Teddy Roosevelt
That's why they sent me, I am expert
Joined:
Jul 2008
Posts:
24376
EE: 100% (207)
TN, USA
|
Attached File
|
Visit my photo collection - http://www.flickr.com/photos/the-dorsal-fin
|
That serial number makes me feel old 
|
|
Originally Posted By getchevyn:
Wat?
Pictures needed. Originally Posted By getchevyn:
Originally Posted By ROMAD-556:
Just picked up a LMT lower and there's a UID square engraved into the lower
Pictures needed. Edit - scanned the square and all it contains is "LMT12345" where 12345 equals the serial number |
|
Originally Posted By geoint:
Forgive the newb question but what the hell is a cage code? That like a batch #? Im so putting one of these on the Colt 6920 OEM1 I just built and I will get more whenever the next damn shipment of Colt AR15A4's finally comes out. |
Squire
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
|
Squire
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
Without blood, it doesn't count!
I survived ARFbortion2016 and all I got was this stupid sigline
|
Originally Posted By SecretSquirell:
Commercial And Government Entity Code. It's an identifier assigned to a manufacturer of government items. Instead of having to write out "Colt Defense yada yada yada" on the side of something, they can just put a simple number. |
Unless we keep the barbarian virtues, gaining the civilized ones will be of little avail. Oversentimentality, oversoftness, washiness, and mushiness are the great dangers of this age and of this people." Teddy Roosevelt
| Hey guys, it is Chad from Carolina Laser Works. Thanks for all the comments. I am ordering some of the square blanks for those that want those tags. I have to call my supplier but it is usually about a week or two before I receive them. Once I receive them I will add them to the catalog on my webpage. Thanks again. |
|
Originally Posted By Charliedeltajuliet:
Hey guys, it is Chad from Carolina Laser Works. Thanks for all the comments. I am ordering some of the square blanks for those that want those tags. I have to call my supplier but it is usually about a week or two before I receive them. Once I receive them I will add them to the catalog on my webpage. Thanks again.
Similar to this (not my rifle) but, same size & shape 
|
|
Originally Posted By Charliedeltajuliet:
Hey guys, it is Chad from Carolina Laser Works. Thanks for all the comments. I am ordering some of the square blanks for those that want those tags. I have to call my supplier but it is usually about a week or two before I receive them. Once I receive them I will add them to the catalog on my webpage. Thanks again. |
UID stickers (Page 1 of 11)
AR Sponsor