AR Sponsor
Posted: 8/4/2012 2:23:59 PM EDT
| Doing a dedicated sbr lower for my 10.3" Daniel defense that will also be suppressed. Is it so hard to find a good deal on a good mil spec receiver extension, buffer spring, and spike's t2 buffer weight? I could use the vltor extension and buy a chrome silicon flat wire spring along with it, but wondering if I am overpaying at brownells. Any other sources? |
|
double check the length of the suppressor an make sure it will fit your 10.3.
I have one and on some depending on the make you need a 10.5. I have a DD 10.3 SBR with ST T2 buffer 
and have been looking into suppressing it. what is the price for the combo you are talking about on brownells? |
|
I had a 10" ST BAR on it before i went to the MOE stuff.
The rail is waiting for a 300 blkout build so i went cheap and light for a new rail. The sights are just me trying something a little different. This was going to be my suppressed SBR with a ST suppressor until i learned that the collar for the suppressor would not fit. The 300 is going to be suppressed with the Lothar barrel with a pistol length DI system. |
|
$199.90 from brownells for vltor receiver extension, colt receiver extension nut, chrome silicon buffer spring, st-t2 buffer, Magpul fde acs-l stock, and vltor sase sling mount end plate. Spent more than if I went for generic cheaper parts, but I do like quality stuff. Got a helluva deal on the lower, so I'm ok with it. Should eventually come out to a very economical MK-18 SBR, TONS cheaper than just buying it straight from DD.
Free shipping from Brownells with code dsr. 
|
|
Quoted:
I had a 10" ST BAR on it before i went to the MOE stuff. The rail is waiting for a 300 blkout build so i went cheap and light for a new rail. The sights are just me trying something a little different. This was going to be my suppressed SBR with a ST suppressor until i learned that the collar for the suppressor would not fit. The 300 is going to be suppressed with the Lothar barrel with a pistol length DI system. I'm was told by my C3 dealer that the AAC Blackout w/QD will mount the AAC m42000 ON MY 10.3 MK18. Let's hope so. |
|
Quoted:
Quoted:
I had a 10" ST BAR on it before i went to the MOE stuff. The rail is waiting for a 300 blkout build so i went cheap and light for a new rail. The sights are just me trying something a little different. This was going to be my suppressed SBR with a ST suppressor until i learned that the collar for the suppressor would not fit. The 300 is going to be suppressed with the Lothar barrel with a pistol length DI system. I'm was told by my C3 dealer that the AAC Blackout w/QD will mount the AAC m42000 ON MY 10.3 MK18. Let's hope so. It will depending on the rail you use. I have a 10.5" with a 9" DD Lite rail and have no clearance issues with the AAC brake and M4-2000 
|
|
Quoted:
Quoted:
Quoted:
I had a 10" ST BAR on it before i went to the MOE stuff. The rail is waiting for a 300 blkout build so i went cheap and light for a new rail. The sights are just me trying something a little different. This was going to be my suppressed SBR with a ST suppressor until i learned that the collar for the suppressor would not fit. The 300 is going to be suppressed with the Lothar barrel with a pistol length DI system. I'm was told by my C3 dealer that the AAC Blackout w/QD will mount the AAC m42000 ON MY 10.3 MK18. Let's hope so. It will depending on the rail you use. I have a 10.5" with a 9" DD Lite rail and have no clearance issues with the AAC brake and M4-2000 http://i901.photobucket.com/albums/ac212/rbdub474/IMGP5074.jpg Nicely done SBR! And if DD MK-18 rail has the same clearance as yours I should be fine with the AAC can clearing. |
AR Sponsor