Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
4/12/2008 12:16:33 PM EDT
can anyone reccomend a small sized air compressor, to clean weapons with?  i need it to be portable and not to big.

thnaks
4/12/2008 1:46:15 PM EDT
[#1]
I know you said compressor, but I just thought I’d let you know how I blow off parts after cleaning. I use the cans of compressed air meant for cleaning PC’s.

I really do need to invest though in a small compressor.
4/12/2008 1:47:19 PM EDT
[#2]
I use the Little Porter Cable pancake Compressor from Homedepot. Harbor freight and Northern also carry a few Smaller Compressors.
4/12/2008 2:02:17 PM EDT
[#3]

Quoted:
I use the Little Porter Cable pancake Compressor from Homedepot. Harbor freight and Northern also carry a few Smaller Compressors.


I’ll really have to take a look at those. It’s not often I use air when cleaning weapons, so I get by with the canned air. But I could use a compressor for other things around the house. I have a rollaway full of aircraft sheet metal tools I could be using!

And ........Frau Quib has an obsession with properly inflated tires on her Jetta!  
4/12/2008 2:03:16 PM EDT
[#4]
most of the hunters /shouters that i know use small dive tanks 20cf at 3500. last a long time
4/12/2008 2:07:13 PM EDT
[#5]
What do the hunters shout about?

Doesn’t that scare away their prey?  
4/12/2008 6:03:40 PM EDT
[#6]
When getting an air compressor for cleaning guns, make sure you get one that has at least a small tank on it.  I have used a tankless air compressor and while it worked fine at the sart, with a little use tended to condense moisture from the air (not a good thing to spray a fine water mist on the parts you are cleaning) worst than the small tank type compressors due to the bypass valve on the tankless compressor.

Ended up adding a tank, which helped a lot (but no auto shut off, so all manual), which took care of the problem.  Note a centrifugal moisture separator did not help enough until the tank was added.

For the same $100 could have gotten the following and been done with it (then again the son would not have had a free compressor for tires ;-)

4/12/2008 6:13:33 PM EDT
[#7]

Quoted:
When getting an air compressor for cleaning guns, make sure you get one that has at least a small tank on it.  I have used a tankless air compressor and while it worked fine at the sart, with a little use tended to condense moisture from the air (not a good thing to spray a fine water mist on the parts you are cleaning) worst than the small tank type compressors due to the bypass valve on the tankless compressor.

Ended up adding a tank, which helped a lot (but no auto shut off, so all manual), which took care of the problem.  Note a centrifugal moisture separator did not help enough until the tank was added.

For the same $100 could have gotten the following and been done with it (then again the son would not have had a free compressor for tires ;-)

toolsandmore.us/ProductImages/portercable/pc1226/C2001-WK.jpg


Thats pretty much the same exact one I have.
4/13/2008 4:35:48 AM EDT
[#8]

Quoted:
What do the hunters shout about?

Doesn’t that scare away their prey?  


You can spot 'em right off- they're the skinny ones!
4/13/2008 10:31:56 PM EDT
[#9]
I've been using the cans of compressed air myself, and I know they aren't expensive, but it just kinda bothers me to go through em.  Because they freeze up when used, I end up having to keep 2 on the bench and alternate if cleaning more than 1 rifle, so it makes it feel like I'm going through twice as many, even though I know I'm not.  

Been thinking about a cheap 3 gallon harbor freight compressor.  Figure for $50 and the amount I'd use it, it should last long enough and work good enough for me.  Been meaning to get one to blow out computer cases anyway.  
AR Sponsor