AR Sponsor
Posted: 4/17/2009 2:20:51 PM EDT
| I need instructions for rebuilding a bolt. I have a BCM kit to put in. My boly does not have the o ring that is in the new kit. |
|
What "O" ring are you talking about?
You can go to the -23 tech manual and get the entire GI tear down/build instruction manual. A bolt isn't terribly complicated, and even though there is a tool for things like installing the extractor and ejector, it's not that difficult to do with regular hand tools and some patience. |
|
Quoted:
What "O" ring are you talking about? You can go to the -23 tech manual and get the entire GI tear down/build instruction manual. A bolt isn't terribly complicated, and even though there is a tool for things like installing the extractor and ejector, it's not that difficult to do with regular hand tools and some patience. It is a Bravo Company SOPMOD? rebuild kit and has a small o ring that appears to go over spring? |
|
Quoted:
Quoted:
What "O" ring are you talking about? You can go to the -23 tech manual and get the entire GI tear down/build instruction manual. A bolt isn't terribly complicated, and even though there is a tool for things like installing the extractor and ejector, it's not that difficult to do with regular hand tools and some patience. It is a Bravo Company SOPMOD? rebuild kit and has a small o ring that appears to go over spring? Tear down the bolt & reverse the process for installing the BCM kit. The O ring isn't really needed due to the added tension in the new extractor spring but it's installed over the spring if you want to have it on there. I don't use my O rings. |
|
Quoted:
Quoted:
Quoted:
What "O" ring are you talking about? You can go to the -23 tech manual and get the entire GI tear down/build instruction manual. A bolt isn't terribly complicated, and even though there is a tool for things like installing the extractor and ejector, it's not that difficult to do with regular hand tools and some patience. It is a Bravo Company SOPMOD? rebuild kit and has a small o ring that appears to go over spring? Tear down the bolt & reverse the process for installing the BCM kit. The O ring isn't really needed due to the added tension in the new extractor spring but it's installed over the spring if you want to have it on there. I don't use my O rings. Thanks! |
AR Sponsor