AR Sponsor
Posted: 12/20/2006 2:37:36 PM EDT
|
I purchased a Stag 2-H upper, and am trying to sight in a holosight and Tasco scope for my rifle. I first put the holosight on, and got it close at 50 yards. When i tried at 100 yards, i seem to have used all my elevation and windage, and may have stripped the elevation screwhock.gif Then i purchased some Burris QD rings and put a "known to be good" Tasco 6-24x on the rifle to try out some handloads... When i sighted down the bore and attempted to move the crosshairs to the boreline, I ran out of windage and elevation adjustment.. I got within 2-3" of zero, but the point is it shouldn't be that far off!!! What is wrong and how do I fix it?? I defer to the gurus here for help..... Thanks, Telephoneman |
same thing here... mine was shooting high and to the right. Anybody got any ideas?? |
|
Take a look... My saga is described here. If I were you I would call stag, and have them replace it. If your problem is the same as mine, the only solution is to replace the barrel. |
|
I called Stag and was told to ship to them, and they would turn it around in one business day!! I did as they asked, and received my package in a little less than a week after I shipped to them.. I opened the package to find a brand-new upper!! I haven't had a chance to shoot it yet, but i boresighted it and it appears to be OK. Just wanted to let you guys know that they didn't seem too surprised by my problem, but worked quickly to get me back up and running Derek |
AR Sponsor