[ARCHIVED THREAD] - replacing hammer/trigger pins

Posted: 6/27/2008 9:01:58 AM EDT

i spent some time searching for this online but couldn't find out exactly what i wanted
I just bought anti-walik pins for my DPMS because the hammer pin keeps moving like 2mm out the left side of the receiver. Can somebody tell me how to push the original pins out all the way, and if their is any technique or order for putting the pins back in? I tried gently forcing them out but they seem stuck in their pretty good, also i assume once i get them out the hammer/trigger will jump out of the lower from tension.

Posted: 6/27/2008 9:23:09 AM EDT

[#1]

One 'leg' of each spring (hammer & trigger) rest in a groove in the pins, just tap harder to overcome the pressure.

Posted: 6/27/2008 10:34:03 AM EDT

[#2]

Quoted:
...also i assume once i get them out the hammer/trigger will jump out of the lower from tension.

They will want to, if you just remove the old pins. You can, though, tap the new pins in using them to simultaneously tap out the old pins.

Posted: 6/27/2008 11:13:40 AM EDT

[#3]

thanks guys, ill wait and try it as soon as the new pins arrive

[ARCHIVED THREAD] - replacing hammer/trigger pins

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - replacing hammer/trigger pins

[ARCHIVED THREAD] - replacing hammer/trigger pins