AR Sponsor
Posted: 9/7/2008 6:06:49 AM EDT
|
finally finished my AR build and went to the range to function test it ,First mag went smooth second mag problems started to occur ,timmney trigger would not reset properly ,you pull the trigger and nothing ,normal bolt operation would not set the trigger , it has something to do with the disconnector. I opened up the AR and slapped the trigger back it with my fingers it would work next shot nothing if I moved the safety on off it would set the trigger after a while that stopped working, anybody else have this problem , looks like I will have to send it back to timmney for adjustment . little disappointed in the situation .I brought a second AR with me so the day was not a total loss AR built on a bushmaster lower and CMMG upper first pic shows how normal bolt operation sets the trigger second one is after manually pushing rear of the disconnector ,THAT sets the trigger to fire YIKES excuse the large pics still learning photobucket http://i328.photobucket.com/albums/l355/putiton11/artriggerpicspics007.jpg http://i328.photobucket.com/albums/l355/putiton11/artriggerpicspics008.jpg |
| It sounds like the disconnecter isn't letting the hammer reset. Take the trigger out and heat the disconnecter screw with a soddering iron. Then take an allen wrench and turn it counterclockwise until the disconnecter BARELY touches the hammer. If you back it out too much it will start doubling. Not enough and it will not reset. GL. |
AR Sponsor