Armory Sponsor
Posted: 2/18/2011 3:11:59 AM EDT
[Last Edit: GWhis][Edited]
| PhotoBucket destroyed all my pictures in this thread.. |
|
Looks good. You might want to cut the slot in the plastic tube for the pressure switch a bit narrower if you plan on using it for small caliber rifle ammo like .223. |
“Remember, no matter where you go, there you are.” - Buckaroo Banzai 1984
"When you find a find a big kettle of crazy, it's best not to stir it." - Dilbert 2009
"When you find a find a big kettle of crazy, it's best not to stir it." - Dilbert 2009
| nice job GWhis, if I was ever to get the Bullet feeder I would do the same mod. I would add more heat shrink to the power connectors. and why not replace the hole spring with some clear tubing. But other then that good job ,I bet you will have a lot of people copying your set up. |
|
Thanks for posting this....
One thought and one question. First the thought regarding the bullets hanging in the switch. I would bet if you flattened out the hump on the switch lever it would solve the problem with the lighter bullets hanging up. The question is... Did you have any issues with the stock spring flopping around with heavy .45 bullets....Mine turns into spaghetti and I have to wire tie it to the support hook. I may try replacing it with the tubing and see how it works. ETA: maybe tubing over the spring to act as a support might be the way to go. |
A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed....Nuff Said..... P.S. Fuck you France!!!!!
|
Thanks...I was using the support wire but the spring was so floppy it kept falling off the hook, hence the wire tie.
The velcro is a pretty good idea....I think I am going to try a piece of tubing over the spring to give it some integrity and see what happens. |
A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed....Nuff Said..... P.S. Fuck you France!!!!!
|
Ive been racking my brain on how to make this instal more elegant. For a long time..
After my last work on my 3d printer adding auto level, I was introduced to proximity switches. And thought HEY! that might work if I can find a AC compatible version. After searching Amazon, I found a 18mm dia with 8mm distance. You can find it here. Its a normally closed, so it opens the connection when something metal passes over the sensor. So picking up a bit of 1 inch Nylon Rod and a section of 5/8. I was able to reproduce the feed ends that go on the metal springs. And adapters (one inch in outer dia) to attach to the clear section of tube. And I ended up with something that looks like this.. 
The 2 leads that come off of the sensor wire in, Just like the switch in GWhis's tutorial. I have mine set flush with the tube and it cuts off with all types of bullets. Lead to copper it don't care. These pictures do not reflect the slight change that I made tonight and that's drilling and tapping 2 nylon set screws into the tube ends to hold the funnels to the spring tubing. Lastly to stop the spring tube from flopping around I added shrink tube to it like so. 
Thanks GWhis for the original idea.. |
Armory Sponsor