Armory Sponsor
Posted: 5/29/2006 8:06:25 PM EDT
|
Today, my Ruger 10/22 failed to fire several rounds. I tried using several types of .22lr but still occaisionally it failed to ignite primer. It would only dimple the rim. My 10/22 was clean and it hasn't been shot that often. I checked it when I got home and it was still pretty clean. (After about 40 rnds.) Have you guys encountered this often? What can I do to fix this problem? |
| Never had a problem with mine. Check with CPC about getting your firing pin pinned. |
|
I intially had the same problem when I rebuild my 10/22 action with all power custom parts. I think most of the problem was due to a oil / junk buildup in the channel that the firing pin rides in. On the other hand it was a titanium firing pin so that might have been some of the problem, but since then with good mags it goes bang every time you pull the trigger. I guess it just took a few hundred rounds to get all the new parts working smoothly together. ETA: is this a new 10/22? if so maybe the firing pin is out of spec being a little too short, need be I have a extra factory pin if you want it |
Armory Sponsor